First, let me tell you that I have no connection whatsoever
with Orion Binoculars, and Telescopes other than being a customer.
Having gotten that out of the way, I will proceed with the review.
I ordered this telescope in November of 2003, and spent
a week waiting with bated breath. I came home from work one
day, and my younger brother told me it had arrived. I was like
a child at Christmas. I brought the boxes out into the living
room, and proceeded to attempt to assemble the telescope. It
did not take very long to realize that the old saw "RTM"
(read the manual) applied here. When I looked in the appropriate
portions of the manual, assembly proceeded at a good pace.
I noticed when I removed the OTA from it's box, the
tube had a minor "ding" in it approx 2" above the mirror
cell. I very quickly looked down the tube, and realized to my
great relief that the "ding" didn't interfere with the optical
path at all. Roughly 1/2 hour after using the manual the Spaceprobe
130 was assembled. I will comment that Orion did use blank boxes
in the parts box to insure no movement in it. There are two
slow-motion controls supplied with the mount. One for the RA,
one for the Dec.
Now I had the scope assembled. So of course,
the new equipment curse set in. Clouds for about a week.
That wasn't too bad. While I was waiting for the weather to
cooperate, I fiddled around with it, including collimating it, (or
so I thought... more later).
Now for a description of the telescope: The Spaceprobe
130EQ is a Synta manufactured 130MM, F/6.9 Newtononian Reflector on
an EQ-2 equatorial mount. The accessories that come with it
are a 6X26 correct image finderscope w/mounting bracket, a 25MM Ramsden
eyepiece, and a 10MM Ramsden eyepiece. The mount is actually
a hair light for this telescope, but will do for casual back-yard
astronomy. I have noticed that when I tap the OTA, it takes
approximately 2-3 seconds for the vibrations to damp. This can
be corrected by modifications listed in other articles on this forum.
The EQ-2 mount comes with two "setting circles" approximately
3" in diameter. I doubt that these graduated precisely
enough for exact object location, but may suffice for "get close
and sweep" location.
One November evening, I set the Spaceprobe out to cool.
After the cooling time (I allowed an hour), I began my observing.
First I turned the scope to M42 in Orion's belt. The nebulosity
was clearly visible, and 3 of the 4 stars in the Trapezium were visible
at 37X. I then put the 10MM eyepiece in the focuser. I
immediately notice that the focuser was very stiff initially, and
difficult to fine focus at higher powers. I had to twist the
focuser knob, wait until the view settled, then twist again.
I believe this is due to the grease that Synta uses during manufacture.
After getting a good focus, I resolved the 4th star in the Trapezium.
About this time the Moon rose, and basically all DSO's went to bed
for the night.
Turning my attention to the Moon, I began doing some
terminator work. First thing I noticed, was that's bright!!
The phase of the Moon was, by the way, waxing crescent. AT 37X
the entire disk was visible in the fov. Using the 10mm I was
able to resolve smaller craters at the terminator, and observe the
shadows slowly moving at the terminator. Later that evening,
Saturn was rising, and I turned the SP130 to it. At 37X, the
image was crisp, and rather small. Then I put the 10mm ep in,
and slowly cranked the focus. My younger brother who was outside
at the time, took a look, and I said "I can see the Cassini Division!).
He has pilot's eyes, but I was skeptical. So I broke out my
2X shorty Barlow, and out it in. With the equivalent of a 5mm
ep in now, I laid my eye to the ep. Wow!! I could see the Cassini
Division, and Titan!
A week or so later, I broke the SP130 out again.(Undoubtedly
hurtung my N8's feelings). With some contortions worthy od Nadia
Cominece, I center the Double Cluster in my 25mm ep. Not to
use a hackneyed cliche, but Awesome!! I could get both of the
clusters in my fov, something the N8 can't do at this time.
Then I swung over and checked out M45. Again, awesome, the entire
cluster was in the fov. Then I said what the hey, and star-hopped
over to M31. Cool, again the entire dso was in the fov.
I've lost count by now. Anyhow, during my last
session with the SP130EQ, this is what I saw. Of course, my
all-time favorite, M42. Then I swung to Auriga. I found
(by sweeping), M36,M37,M38. These were all very fine.
Then I chased M41 in Canis Major. Again, very fine. I've
run out of hackneyed cliches here. Then I swung to Jupiter (not
the first time btw), and using the various ep's, and barlow as necessary,
saw the bands, zones, but I don't think I saw the GRS. Might
not have had enough mags for that. By this time Herculaes was
rising, so I said "Hercules? M13?". So I checked
out what charts I have, and went back outside. I found it!!
The only way I can describe it is looked like a luminescent q-tip
head. But, wow!!
Would I buy this telescope again? Yes. Would
I recommend it to someone on a limited budget? Yes, with the
caveat that they should NOT expect to see objects as they appear in
photos, with the exception of planets, and the Moon. The only
suggestion I make to Orion is that they mount the OTA on an EQ-3 mount
to give the stability that this sleeper telescope deserves.