Jump to content


Photo

G11 mount cable pinouts / non gemini

This topic has been archived. This means that you cannot reply to this topic.
2 replies to this topic

#1 D_talley

D_talley

    Vanguard

  • *****
  • Posts: 2133
  • Joined: 07 Jul 2005

Posted 26 February 2009 - 03:41 PM

The hand box for my G11 mount has broken the connector and I will change it out but I don't know the color sequence that was used at the end. Also need to make backup cables going to the motors and need the color pinouts as well. This is not the Gemini mount.

Thanks

#2 Kaizu

Kaizu

    Messenger

  • -----
  • Posts: 472
  • Joined: 17 Aug 2007

Posted 27 February 2009 - 10:51 AM

I have here one in my hand. The connector is RJ12 (phone connector)

When I'm watching it front side and the pins are downwards, the most left pin is nr.1.
1. White
2. Black
3. Red
4. Green
5. Yellow
6. Blue

The motor cables had same colours in same order.

Kaizu

#3 D_talley

D_talley

    Vanguard

  • *****
  • Posts: 2133
  • Joined: 07 Jul 2005

Posted 27 February 2009 - 01:19 PM

Thanks for the info. I will make my cables this weekend...clouds.






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics