Jump to content


Photo

1 5/8" diameter shaft

This topic has been archived. This means that you cannot reply to this topic.
2 replies to this topic

#1 StarWrangler

StarWrangler

    Viking 1

  • -----
  • Posts: 978
  • Joined: 03 Sep 2004

Posted 11 May 2009 - 05:45 PM

Hi All,

Can any one make a 1 5/8" diameter shaft about 6 to 8 inches long. Either made out of a standard pipe or a solid shaft with bore sight hole through it , and some type of tread on one end to fit a pipe flange.

It is for my old 6 inch Byers drive.

Thanks,

Alan

#2 polaraligned

polaraligned

    Viking 1

  • -----
  • Posts: 691
  • Joined: 26 Dec 2008

Posted 11 May 2009 - 09:48 PM

If you give me a bit more details I can probably help you.
Can you use standard black pipe? Does the end need a tapered pipe thread?
A picture of what you want to do may be worth a thousand words. E-mail me at: polaraligned at verizon.net
Replace the "at" with @

Scott

#3 StarWrangler

StarWrangler

    Viking 1

  • -----
  • Posts: 978
  • Joined: 03 Sep 2004

Posted 12 May 2009 - 05:22 PM

Thanks Scott,

I'll send you some more info tomorrow.


Alan






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics