Jump to content


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Byers mount help

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 Ziggy943

Ziggy943

    Gemini

  • *****
  • Posts: 3355
  • Joined: 11 Aug 2006

Posted 30 June 2010 - 11:06 PM

In my wisdom I removed the micro switches on my Byers 812 without making a diagram. One of the two switches had broken some years back. I am having a horrible time trying to figure out the wiring. The only thing I have for sure is the switch with the two contacts (no nc) wired together (red wire).

Any illustration of the micro switch wiring would be a great help.

I have the motor turning but both switches right now need to be up. Also the neon light doesn't dim the way it should when the motor is running and hasn't reached the micro limit switch.

Thanks again.

#2 hottr6

hottr6

    Mercury-Atlas

  • *****
  • Posts: 2773
  • Joined: 28 Jun 2009

Posted 11 April 2011 - 12:24 PM

Here is what I *think* the original wiring of the Byers 812 may look like. When I received mine, it had a lot of hotrodding to incorporate DSC. I pulled it all out and returned it to what I *think* is original.

Attached Files




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.



Recent Reviews


Imaging/Sketching Contest






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics