Jump to content



  • Please log in to reply
3 replies to this topic

#1 oddog


    Ranger 4

  • -----
  • Posts: 344
  • Joined: 11 Nov 2008
  • Loc: Grass Valley, CA

Posted 01 November 2010 - 03:03 PM

I have an NGC Sky Vector on an Ultima 8 for which I need the instruction manual. All the manuals I have been able to find (JMI, Orion, Lumicon, etc) have been for the 3.65 version, none for the original 3.01. While they are similar there are menu and procedural differences. If anyone can point me to a downloadable manual or if you have one I can photocopy or pay you to photocopy I would appreciate it. I am having trouble getting the unit to work and there is a very good chance the issue is procedural. Thanks in advance. Tom Duncan

PS: I asked in another posting if anyone had done the v3.65 chip upgrade ($60) and got little respnse...anyone done this? Is is worth it?

#2 Richard Turner

Richard Turner

    Mariner 2

  • *****
  • Posts: 200
  • Joined: 25 Jan 2009
  • Loc: NC

Posted 01 November 2010 - 05:06 PM

I have a manual for the Lumicon Sky Vector II, version 2.70, March, 1994. Don't know if that would help. :question:

#3 oddog


    Ranger 4

  • -----
  • Posts: 344
  • Joined: 11 Nov 2008
  • Loc: Grass Valley, CA

Posted 02 November 2010 - 01:01 PM

Hi Richard, thanks, but I have that manual already. It is similar in some functions but different in others.

Anyone else?


#4 MikeMosier


    Lift Off

  • -----
  • Posts: 1
  • Joined: 22 Jun 2009

Posted 25 April 2011 - 10:31 PM

do you have a email copy of the sky vector 2 manual?
I have lost mine.
Mike Mosier

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics