Jump to content


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

GP2: Grab and go AND beginning imaging?

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 c_volto

c_volto

    Sputnik

  • -----
  • Posts: 43
  • Joined: 04 May 2010

Posted 04 May 2011 - 09:42 PM

Do you think the Vixen GP2 can be used to learn imaging using short fl scopes? I would like very much to start with RA motors only and build my way up into auto guiding. Then I would buy another mount just for AP and use the GP2 as grab and go. The problem with this plan is the DD-3 control box. It’s listed on Vixen (http://www.vixen.co..../info_new_e.htm - Product No.37912-5) but I don’t find it anywhere else.

I wouldn’t like to mess with goto at this time.

#2 watcher

watcher

    Vanguard

  • *****
  • Posts: 2123
  • Joined: 21 Nov 2007

Posted 05 May 2011 - 01:36 AM

The DD-3 is a new product. I can only suggest that you contact Vixen to find out when it will be available.

The GP-2 is an excellent mount for imaging with a small scope


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.



Recent Reviews


Imaging/Sketching Contest






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics