Jump to content


Photo

12.5' POD MAX Update

  • Please log in to reply
2 replies to this topic

#1 SkyShed

SkyShed

    Vendor (Sky Shed)

  • -----
  • Vendors
  • Posts: 251
  • Joined: 23 May 2005
  • Loc: Staffa , ON

Posted 24 July 2012 - 09:44 PM

Hi everyone,

It's been a few weeks since I updated you. We have just passed the busiest time of the year at the POD factory, both with our products and the factory's own products. This meant focusing on production, and development had to take a back seat for a few weeks. Other smaller aspects of POD MAX development have continued during this time.

I'm happy to say we're back on track now and the master dome parts are being shipped to our shop tomorrow for trimming so that we can add them to the development MAX. Our pattern shop has also started on the slot cover molds, which they're making all of at the same time.

The factory is very happy with the the way the dome molds are working (meaning they're easy to manufacture with) and are happy with the dome parts produced with them.

We're looking forward to adding them to the development MAX asap and I'll be showing you our progress in picture form.

We're getting close to the end of development now and are really looking forward to setting up for production and roll out.

Will keep you apprised.

CS!
Wayne Parker

Attached Files



#2 SkyShed

SkyShed

    Vendor (Sky Shed)

  • -----
  • Vendors
  • Posts: 251
  • Joined: 23 May 2005
  • Loc: Staffa , ON

Posted 25 July 2012 - 02:52 AM

.

Attached Files



#3 SkyShed

SkyShed

    Vendor (Sky Shed)

  • -----
  • Vendors
  • Posts: 251
  • Joined: 23 May 2005
  • Loc: Staffa , ON

Posted 25 July 2012 - 02:54 AM

PS Those are 3D graphics if you have red/blue glasses to view them with.

Wayne






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics