Jump to content


Photo

Help with pinout of eq-6 eq-5 mount controller

  • Please log in to reply
4 replies to this topic

#1 Gregk

Gregk

    Vanguard

  • *****
  • Posts: 2420
  • Joined: 19 Nov 2006
  • Loc: San Tan Valley, Az,

Posted 16 November 2012 - 11:21 PM

Looking the pin out of my EQ-5 mount Making a USB Direct EQMOD cable I know Ground is on Pin 5 (metered) of the RJ45 Cable but need RX and TX connections . Will check manual but not sure it is in there

Thanks

Greg

#2 ccs_hello

ccs_hello

    Fly Me to the Moon

  • *****
  • Posts: 6343
  • Joined: 03 Jul 2004

Posted 17 November 2012 - 08:21 AM

http://www.telescope...29289_05-06.pdf Page 11.

#3 Gregk

Gregk

    Vanguard

  • *****
  • Posts: 2420
  • Joined: 19 Nov 2006
  • Loc: San Tan Valley, Az,

Posted 17 November 2012 - 09:37 AM

http://www.telescope...29289_05-06.pdf Page 11.


Thanks Looking for RJ45 connections to the hand controller It's an 8 pin conncetor

#4 ccs_hello

ccs_hello

    Fly Me to the Moon

  • *****
  • Posts: 6343
  • Joined: 03 Jul 2004

Posted 17 November 2012 - 11:16 AM

Greg,

Here it is:
http://eq-mod.source...t/eqdirect2.htm

Also note that the Rx Tx signals are in TTL level, not RS232 level.

Clear Skies!

ccs_hello

#5 Frank @ Van

Frank @ Van

    Sputnik

  • -----
  • Posts: 29
  • Joined: 24 Jan 2005
  • Loc: Vancouver, BC, Canada

Posted 17 November 2012 - 11:21 AM

http://ca.skywatcher...oad.php?ccid=38

It is the manual for the AZ-EQ6 mount, but I think the pinouts are the same.






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics