Jump to content


Photo

A new post relating to my older "tips" post.

  • Please log in to reply
8 replies to this topic

#1 ed_turco

ed_turco

    Apollo

  • *****
  • Posts: 1389
  • Joined: 29 Aug 2009
  • Loc: Lincoln, RI

Posted 09 December 2012 - 12:40 PM

I'm putting this new post as the older one has died of old age and people might not see what I have to say; the one about "Tips". Here are pictures of my drill press system; it is crazy but it works. :foreheadslap:

Here's #1

Attached Files



#2 ed_turco

ed_turco

    Apollo

  • *****
  • Posts: 1389
  • Joined: 29 Aug 2009
  • Loc: Lincoln, RI

Posted 09 December 2012 - 12:42 PM

#2

Attached Files



#3 ed_turco

ed_turco

    Apollo

  • *****
  • Posts: 1389
  • Joined: 29 Aug 2009
  • Loc: Lincoln, RI

Posted 09 December 2012 - 12:43 PM

#4; #3 didn't come out LOL!

Attached Files



#4 Pinbout

Pinbout

    Cosmos

  • *****
  • Posts: 8035
  • Joined: 22 Feb 2010
  • Loc: nj

Posted 09 December 2012 - 01:47 PM

so it wasn't just the thingy in the top, gearing down from the chuck to the table :lol:

#5 tim53

tim53

    Cosmos

  • *****
  • Posts: 9418
  • Joined: 17 Dec 2004
  • Loc: Highland Park, CA

Posted 09 December 2012 - 01:51 PM

That's really neat!

Tim

#6 David Pavlich

David Pavlich

    Transmographied

  • *****
  • Administrators
  • Posts: 27794
  • Joined: 18 May 2005
  • Loc: Mandeville, LA USA

Posted 09 December 2012 - 03:30 PM

As long as it gets you from Point A to Point B, it's good.

David

#7 kfrederick

kfrederick

    Gemini

  • *****
  • Posts: 3018
  • Joined: 01 Feb 2008

Posted 09 December 2012 - 09:34 PM

Look like a edger now for the grinder

#8 ed_turco

ed_turco

    Apollo

  • *****
  • Posts: 1389
  • Joined: 29 Aug 2009
  • Loc: Lincoln, RI

Posted 10 December 2012 - 08:58 AM

Glad I got to show the pics; I was lucky that the machine had that circular base!

#9 glennnnnnn

glennnnnnn

    Mariner 2

  • *****
  • Posts: 257
  • Joined: 20 Oct 2009
  • Loc: San Diego, CA

Posted 10 December 2012 - 09:23 AM

You could always just bolt something (that would have the turntable) onto the base.
But the key is your drillpress: without the torque & low rpm it probably wouldn't work.






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics