Jump to content


Meade ETX 105 case for ETX 125

  • Please log in to reply
1 reply to this topic

#1 ClusterHunter110


    Vostok 1

  • -----
  • Posts: 188
  • Joined: 26 Feb 2012

Posted 13 February 2013 - 11:42 AM

Hi all,

Since I've been looking on Meade's online store, they have an ETX 105 case on closeout. Since I'm trying extremely hard to find/make a case for my ETX 125, this might be one good way to start but....would the ETX 125 be too large to fit in the 105 case? I'm kind of curious if I can just cut out some of the foam and it could fit perfectly. But then again, I'm not sure if it's worth it.... :help:

#2 rvrrnnr


    Lift Off

  • -----
  • Posts: 4
  • Joined: 24 Jan 2013
  • Loc: Boulder City, Nevada

Posted 20 February 2013 - 04:29 PM

I think this case should work with some foam trimming. I think the tube lengths are the same, the mount is the same, it's the tube diameter that is different.

My 125EC case has a cutout length of 19 1/4" for the tube and mount. The total internal case measurement is 23 1/4".

Good Luck,

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics