Jump to content


Photo

Problems with my CGEM and guiding

  • Please log in to reply
2 replies to this topic

#1 Jose Candelaria

Jose Candelaria

    Explorer 1

  • *****
  • Posts: 62
  • Joined: 23 Apr 2012
  • Loc: Puerto Rico

Posted 10 June 2013 - 11:33 AM

Hello. I have a problem that I would like to help me solve. My equipment is a Celestron CGEM mount and Orion StarShot mini autoguider. At first everything right, but two months as my guide began to be a bit lacking until I do not even calibrated. It seems that the guiding does not send or mount command does not receive and does not move the mount to calibrate. :bawling:

#2 rmollise

rmollise

    Hubble

  • *****
  • Posts: 15373
  • Joined: 06 Jul 2007

Posted 10 June 2013 - 12:52 PM

Are you using the ST-4 port or the serial port on the hand control? Have you checked PHD to make sure no settings have been changed accidentally? Can you move the mount manually with PHD? Have you checked your guide cable?

#3 Jose Candelaria

Jose Candelaria

    Explorer 1

  • *****
  • Posts: 62
  • Joined: 23 Apr 2012
  • Loc: Puerto Rico

Posted 10 June 2013 - 03:25 PM

I use the ST-4 port., PHD settings are right, I need to check the wire.






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics