Jump to content


ST-4 port in EQ-5

  • Please log in to reply
No replies to this topic

#1 nekkar1


    Lift Off

  • -----
  • Posts: 2
  • Joined: 03 Apr 2014

Posted 03 April 2014 - 01:02 PM

Hello friends,
I installed a ST-4 port in an EQ-5 pad to autoguide an Vixen GP mount. I tried to do it with MaximDL and the system seems to work, but the calibration fails very often, and does not track the selected star. Anyone could work with this hardware?
Thank you in advance.

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics