C-9.25 SCT C-8 SCT C6-R with moonlite CF 2 focuser 10" home made Dob with Parks optics William Optic Zenith Star 80 ED I Skyview pro Goto mount. Losmandy GM-8 Orion 20X80 binoc's Orion Paragon-Plus Binocular Mount and Tripod
Photo: Qhy9 mono + qhy 5x2" filter wheel and Baader 2" LRGB, Ha, O3 and S2 filters , Meade DSI Pro 2 as guider, TS 9mm off-axis guider Binoculars: Nikon Action 12x50 Telescopes: Skywatcher Evostar 120ED f7.5 APO + TS 2" flattener Mounts: HEQ5 Pro Eyepieces: Nagler 11mm type6, Pentax XW 7mm, Televue 2X barlow 1.25"
Quote:Here we go again!
Unless your mount control PCB is version 2.0 or later the polarscope LED firmware option won't be available in the menu.
Do a search here on CloudyNights to find the other 950 threads on this very same subject.
Quote:I have no idea what my "PCB version" is on the mount. Like I said the "Firmware version" on my hand controller is 3.01. I want to upgrade the firmware anyways. Since you don't know the answer to my original question. your comments are useless to me, and actually quite rude.I can call Orion later today, but I hoped I could get an answer here on CN.
Uncle Rod Uncle Rod's Astroblog: http://uncle-rods.blogspot.com/
Quote:The "RJ-11" is the telephone looking plug that plugs into the center of the HC for computer interface The cord that came with the unit (that I lost) had a RS232 (DB 9)serial plug on the other end.My new lap top only has USB plugs. I assume that if I bought a USB cord, that it would work, but I wasn't sure.
Jim Molinari 20" Spica Eyes Slipstream 14.5" Starmaster 180mm Orion Mak Sirius EQ-G