AP1200GTO/AP1600GTO LTE/AP Mach1 16" Starizona Hyperion on order 14" LX200R & 7" Meade Mak FSQ106ED Tak .75 reducer +1.6 extender Coronado 90mm DS BF30 PST Lunt 60 PT FT Lockwood 12" f4. mirror set in a box AT6RC / AT12IN/ CT152 achro WO ZS66 / WO 80mm Doublet SBIG STF8300M CFW8/OAG/ Baader inside STT8300M FW8SG Astrodon inside Hutech 5DII 5D MkIII 60Da 6D 16-35mmL, 24-70mmL, 70-200mmL, 300mmf4.L, 400mmf5.6L, 100mmf2.8L, 50mm f1.2L, 135f2. 10'x14' ROR
BackyardEOS ~ Purpose-built astrophotography software!http://www.backyardeos.com/CANON, NIKON, QSI, SBIG, ATIK, SX, ASI, QHY, SSAGAT8RC, AT6RC, AT65EDQ, EON 120mm, Lunt 60THa B1200ASTRODON LRGB Ha NII SII OIII (3nm), IDAS, CLS, SkyGlow10Micron GM2000HPS (ordered), NEQ6, HEQ5, CG5-GTOne clear night a year
ATM 13.1" reflector Sky Watcher BK 120 ED Orion 80 ED HEQ5 Pro and EQ6 Pro Modded Rebel XT and T3i unmodded KWIQ Guider http://www.pierresplace.ca
Quote:Hello i have a question for Guy. I know you have exlained this but...I have Canon 550d.I have only the one cable hooked in from small trapazoid on my camera, to usb port on my laptop.Can i use the focus feature of Byeos with just this one link? (i've quoted from earlier post below) Quote...There is no need to disable or enable the in-camera mirror lock between Frame & Focus and the imaging mode. BYE will automatically use the appropriate cable to accomplish the task for you… but you do need a serial cable in imaging mode if you have mirror lock enabled....UnquoteI have to ask because i'm still a little unsure...Dave
Quote:What does this program do for the owner of a 350d?
Quote:Hi i was wondering if anyone could help me with an issue.I know i have everything set right with my byeos and my 550d. When i plug my usb cable to my cam and laptop and try and start up byeos i do not get a connection. the lcd of my cam says "busy". I am suspecting its my mini 5 trapizoid connection on my camera body. Any suggestions would be helpful.thanksDave
My gear: --Celestron 8EdgeHD & 11EdgeHD | 80mm F/6 Triplet | Modified Canon T1i | QSI683WSG-8 | QHY5L-II | Celestron AVX mount | iOptron CEM60 mount | iOptron ZEQ25 mount --- My skies:
"Life is a journey, enjoy the ride" *********** Stellarvue 90 Raptor CF.Explore Scientific 152mm Comet Hunter.Orionx14g.Borg 125SD.Borg 60ED. Borg 50Achro. AT10RC. AT6RC. iOptron iEQ45GTN w/TDM.iOptron ZEQ25.iOptron Cube Pro.iOptron MT Pro/iOptron SmartEQ Pro.Celestron 10x50 Way too many EPs, flatteners and reducers. Nikon D5100, Canon T3i and a bunch of filters.
Quote:I mention this because your website is nicely done and I think you care, December seems to be misspelled on your download page.
Quote:Good morning, I finally performed my first imaging run last night, lights, darks, bias, and finally flats this morning. Lights and darks were done in TheSkyX and are in the FITS format. Bias and flats were done in BYEOS, but in RAW. Maybe I can't find it, but Deep Sky Stacker won't open RAW which means I need to perform a couple of extra steps to convert them into something DSS will work with. Any chance BYEOS could be configured to output to FITS, automatically?