7x35 and 10x50 sears tower binocs, 3" f/10 edmunds reflector, 2.4" f/11.7 manon refractor, 6" f/8 jaegers refractor, 10" f/11 R30 Istar refractor, 3" f/15.8 sans&streiffe refractor, 3.1" f/15 selsi refractor(towa 339), 2.4" f/15 sears refractor, selsi 30x30mm spyglass, criterion 5-draw 25x45x75x spyglass(1957), 4.25" f/14.8 tasco 20te.http://cleardarksky.com/c/OmahaNEkey.html
Russ email: email@example.com cell: 949-637-9202
Celestron CG-5⁴, CGEM², C6-N, C6, C8, Nexstar 8SE, 6SE, ONYX 80 EDF, Orion ST 80 A Vixen R130SF w/Porta II mount William Optics ZS110 ED APO, FLT 132 Triplet APO, SV70 ED SV115T20 Wicháhpih'a
Quote:It's my humble opinion that JB Weld wouldn't be strong enough for the type of break that Eric links to. I think taking it to a welding house would probably be his best bet.
Scopes: Meade SN6, 10" Dob, Meade LS6, 5" reflector, 8" reflector, 102GT
Mounts: LXD75 and LXD55
Camera: SBIG 8300M, Baader 7nm Ha, OIII, SII, LRGB
Quote:I am inclined to agree that welding is not an option, and epoxy is unlikely to hold.Your suggestion I think is the right one, but I would go further than just two screws.Better would be maybe three screws. OR...Drill holes all the way through on a press (a drill should go through this easily) and do long bolts with nuts on the ends.I agree though. Screws would be the best way to fix this.
Quote:I need a glue to repair two cast aluminum pieces. Will need to hold 10lbs.
Dark Arts Observatory, Brockport, NY - Skyshed POD XL5 with iOptron iEQ45 Mount
Scopes: C8, C5, SV110 ED, EON-72 ED, ST 80, ATRC6, Megrez 90
Others may disagree. Your millage may vary. Void where prohibited by law.
I lost count of my scopes. Now I just want mobility. I came, I saw, I bought some interesting accessories, and put names to faces: NEAF 2012, ASAE 2012, SWAP 2013, ASAE 2013.