Quote:Using Windows XP, and ASCOM Platform 6SP1.ASCOM works fine for other things (talking to my Littlefoot mount controller, talking to my GTO CP3) so I'm sure it's not ASCOM itself and it's not my USB to serial converter.But when connecting PEMPro to my CGEM things get seriously screwed up. I can't get past step 1 in the calibration wizard.Other folks have reported this problem, have even done Windows re-installs. But I have no information on someone getting it working..
Quote:also i'm not having any trouble with the chooser, or setting driver parameters, etc.here's something else.. whatever the driver is doing, it screws up PEMPro's UI. the interface doesn't paint for prolonged periods of time.if i select "show handpad" in the Celestron settings, the handpad doesn't paint properly either. it is really freezing up.ah. and if i kill the celestron driver, PEMPro returns to life, and i can actually reconnect to the scope.somebody else reported this exact same problem on the PEMPro forum about a year ago, but no update/resolution came about.
My gear: --Celestron 8EdgeHD & 11EdgeHD | 80mm F/6 Triplet | Modified Canon T1i | QSI683WSG-8 | QHY5L-II | Celestron AVX mount | iOptron CEM60 mount | iOptron ZEQ25 mount --- My skies: