Quote:The Pro, At least mine, is running version 4.16.
Dave JessieOutreach Events
Clear skies - Jim Crazy PNW imager !
A-P Mach1 on 12" concrete pier - ROR structure.
Tak FSQ85-EDX, Tak FS-128. Orion 8" f/3.9 w/MoonLite motorized - MPCC MkIII CCD:
SBIG 8300M/FW8, Astrodon 36mm LRGB, 5nm Ha, 3nm SII, OIII - Canon EOS 6D unmod SSI3, SSAG,
Skytools3pro, MaxImDLpro, PSCS5, PSPpro, TheSkyX, TheSky6, BYE, StarTools
Orion XX14g -for visual- diags, ep's, accy tubes, Binocs .
http://www.faintfuzzy.net Stuff C14, C8, Orion XX14i, Meade 8" ACF, AT6RC, AT102ED, Orion ED80, PST, AP1600GTO, CGE, CG5, ST10-XME/CFW8, QHY8PRO, Optec TCF-s, Microtouch Focuser, Pyxis LE, Hyperstar for C8.
Quote: GeorgeNC, you say that you did a two star alignment and then polar alignment. Did you run through the calibration stars before doing the polar alignment? If not, that could account for all of the slews being off. Also, it's a good idea to do a factory reset after a firmware update (or whenever you get bad goto performance.) That's also been known to clear up problems like this.
Quote:Regarding NexRemote, my old version won't load on Vista and I'm sure I need a newer version anyway. So I went to Celestron's site and downloaded what is labeled "30 Day Trial" version, but after installation the program required a serial number to start. Without a serial number a window pops up with the old "you are not authorized" number. Daryl
Quote:Do you no the latest version number for NexRemote. Also, the NexTour portion of the download would not install on my Vist 64 bit notebook. I just ordered the disk from Adorama, who seems to have a good price, but they don't indicate the version number.
Quote:Does this mean that my mount is not perfectly polar aligned?
Quote:I thought that the polar alignment was a physical alignment