Astrophoto: Intes Micro ALTER-M606 (6" f/6 MCT), Astrotech AT6RC (6" f/9 RC), 2x Tair-3 lenses (300mm f/4.5)
Visual: Celestron 8 SCT ('77 Orange Tube, 8" f/10), Selsi #247 Refractor (aka Towa #339, 80mm f/15), Tasco 11TE-5 Newtonian (4.5" f/7.9), Galileoscope (50mm f/10)
Mounts: Celestron CI-700, iOptron ZEQ25GT, Celestron CG5-ASGT, plus a couple old EQ2s My Astrophotography Site: http://ap.x-wing.ca/
Celestron CG-5⁴, CGEM², C6-N, C6, C8, Nexstar 8SE, 6SE, ONYX 80 EDF, Orion ST 80 A Vixen R130SF w/Porta II mount William Optics ZS110 ED APO, FLT 132 Triplet APO, SV70 ED SV115T20 Wicháhpih'a
Quote: Is the torque required to move the mount the same regardless of weight placement?
Quote: I purchased an Orion 7.5 lb that I use as a 'slider' weight between either the CGEM 17 lb or the CG5 11 lb. This allows me to achieve better balance control while keeping the primary weight mass at a fixed point. Plus it functions as the dampener and is much easier to move when you need to shift the balance east or west heavy. Good luck with your mount though. I look forward to your results and feedback.
17.5" f/5 Dob. IM-715 MCT. 120ED. Lunt 60mm Ha. Zeiss, Leica, Fujinon, Nikon, Pentax, Bushnell bins