Celestron 150 XLT ReflectorCelestron C6-n Reflector102GT-SLTXt6Vixen StarGuy
- Dan Zhumell Z8 Dobsonian (A.K.A. "The Cannon") Zhumell 30mm, 2" Wide Field Zhumell 9mm 1.25" Plossl Custom made setting circles and a Wixey digital level
Antares 12" Dob Stellarvue 10*60 finder Telrad Meade 25mm Plossl, Orion 10mm plossl, Celestron 6mm plossl, Paradigm 18mm,15mm,12mm, 8mm, Knight Owl 20mm, Shorty 2x barlow, Celeston Ultima 2x Catseye Triple Pack Collimation 4.5" Tasco 11TR Frankenscope 60mm Tasco 9TE-5 60mm Tasco 7T Oberwerk 12*60 binos
Quote:Tell me how you guys are zeroing your Wixey?
Quote:Thanks again, Carol, for starting and keeping this thread. It is one of the most helpful anywhere on CN!
Quote:I've got the WR300 and also the Craftsman and the Craftsman is zeroed on start up while the Wixey isn't.
Quote:The Craftsman is set indefinitely. It is factory set for level. The only problem is the BRIGHT green back light on it.
Orion ED80 - AT Voyager with TNT,pier ext.,Vixon steel tray and Manny's mod.
Omni 120 cg4 with Orion pier ext. and RA drive, Binotron-27 (25mm & 17mm Sterlings)
Orion XT10(Original F/5) SkyStopper Equatorial Platform
Jason Constellation Model 311(Modified with 1.25"Crawford Machine focuser & rings)
Quote:Donnie:The way you put this degree circles puzzled me. Unless this 1/4" plywood board does not rotate with the scope, you will have a hard time to find a place to put the pointer on.
Quote:In your drawing, the bottom of the scope is a lot of higher than it is, at least on my scope, which blocks part of the circle at various alt angles.