Quote:Sounds like you probably need to clean the pads. Oil can migrate onto the pad surfaces and if the mount spent any length of time on its side, there's a good possibility that the pads were compromised.
Quote:I am talking about 1-2 grams of force applied to the 12 lbs ota on a well balanced mount. I don't remember it being this easy to move, nor was it the first few nights. Thank you for the tomb of info on the clutches. Adam
Quote: Still tracks perfectly for being stored for 9 years
6" F4.6(w/Paracorr) Reflector , 8" F11 Dall Relay Scope ,6" F5 RFT Refractor w/Istar Obj , G11 Mount Gemini1 Level 4
Quote: the clutches just do not have the grip to support the refractor that is not perfectly balanced.Vahe
--------------------Clear Skies, PJ Refl.- 203/1420; Refr.- 110/616, 75/500; Bino.- 15X60, 10X50, 8X30 __________________________________________________
Quote:Here is a question for you...are you using a polar-alignment scope? I have a G11 that I bought used, so I'm not sure of its vintage. I had the problem you describe; a polar axis that could not be tightened effectively. In my case it turned out to be the polar scope preventing the clutch knob from doing its job. If I didn't use the polar scope, the clutch would tighten just fine. I figured this out after buying the new clutch pads.