CPC 1100 Fastar / FeatherTouch / Moonlite CS / StarSeek StellarVue SVR-90T Raptor / NexstarSE / Sky-Fi / Vixen Porta II Lunt LS80T/B1800 / Moonlite CF Canon 12X36 IS II Ethos 13mm, 17mm / Nagler 31mm / PanO 41mm ES100 9mm, 20mm / ES82 4.7mm, 24mm 2X Powermate MaxBright Bino Hyperion 8mm x2, 13mm x2, 17mm x2, 21mm x2 Baader Ceramic Wedge
Thanks, Mitch... "fmhill"
"My GOD, It's Full of Stars!" For the Obser: Atlas EQ-G w/moded SN8,JMI moto-focus, flocked tube,custom mirror cell.ED80 w/ACCUFocus,SSAG,DSI,EZ Guider. Modded Canon T1i,Pentax K-5II. For the field:14" Orion 14xxi,Flocked Tubes,Custom Paint,6 Fan Cooling,LED ground board lighting. Celestron CG5GT for film/digital photos w/EZ Guider, Atlas EQ-G w/an ES102ED/AT72 Piggy backed,EZ Guider. Various 1.25 & 2" Eyepieces.
Scopes: 190mm SW Mak-Newt @ f/5.3 & 90mm SV Raptor Triplet @ f/7Cameras: Atik 383L+ mono w/ EFW2 FW with Astrodon filters & Canon XSi 450D (Modded)Mount: Astro-Physics Mach1GTO mount guided with QHY5 KWIQ guiderSoftware: Sequence Generator Pro; PixInsight; Photoshop CS5Best investment: Stone Garden Observatory - Bortle 4 (Green)
Uncle Rod Uncle Rod's Astroblog: http://uncle-rods.blogspot.com/
Quote:Did you check the fuse? It's in the cigarette plug electrical element. Just screw off the end, remove the fuse, and make sure it hasn't blown; easy to replace if it has. ...Keith
Quote:Even turned up fairly high, the strips will barely feel warm.
Quote:Quote:Did you check the fuse? It's in the cigarette plug electrical element. Just screw off the end, remove the fuse, and make sure it hasn't blown; easy to replace if it has. ...Keith If the light on the control box comes on as you advance the knob, the fuse is good. No need to dig it out.
Quote:At the objective end, particularly on SCTs, a dew cap is also a must.