Celestron EdgeHD 8 + AVX | Sky-Watcher Pro 100ED APO + Vixen Porta II + Oberwerk Tall | Celestron NexStar 6SE Fujinon Polaris 10x50 FMT-SX | Bushnell 10x42 Legend Ultra HD
Dave in West Michigan Tasco 10te (1959) 76.2x1200mm Tasco 7TE-5 60x1000mm f16.7 Meade 2045 sct Meade 312 80mmx900 (Japan) Polarex 114 60x900 Jason 313 SYW Yamamoto 60x900mm Orion 10 Inteliscope Dob, Nexstar C6, 102, and 80GT, Ultima C8, Coulter 8 dob, Meade ETX80, LXD75 Pentax 12x42 DCF, 16x50 PCF, Swift 8x40 Pentax ist DSLR, Canon sx110
Whenever I have come into large sums of money in my life, I always put half of it aside to spend on fast cars and the pursuit of loose women.
I put aside the other half to spend frivolously.
Quote: Well, it's not like I needed another scope ...
Dark Arts Observatory - Brockport, NY - Skyshed POD XL5 with iOptron iEQ45 Mount
Scopes: C8, C5, SV110 ED, EON-72 ED, ST 80, ATRC6, Megrez 90
Quote:Quote: Well, it's not like I needed another scope ... Blasphemy!
Quote: I did have some trouble getting Sky Safari to control the mount properly via my iPad and Skyfi, but that can wait.
Quote:Quote: I did have some trouble getting Sky Safari to control the mount properly via my iPad and Skyfi, but that can wait.
If I remember correctly this could be the issue.
I had to select Nexstar GPS from the scope list to gain control of my scope, not Nexstar 6/8.
The iPad works as the gps and sends the location.
If you can connect to skyfi but not your scope then this should fix things, hopefully.
I am assuming that you are plugged into the hand controller and not the aux port on the base.