Quote:I am trying to upgrade my auto guiding setup.
Current setup is a Pictor201XT output through RJ12 cable to a #520 Electronic Relay that outputs to the telescope hand controller. Meade techs hard wired the relay output cable to the hand controller.
The pinout from the Pictor is
What I would like to upgrade to is a modern auto guider, with a USB cable to laptop, having PHD app, and the RJ12 output from the auto guider camera plug into the 520 Relay box.
But all new guilders interesting me are ST-4 compatible with a pinout of
Can I do the new configuration by simply switching the pin connection for 4 and 5 on the Rj12 cable?
Or is there more to it? Will the new camera output activate the hand controller?
I am not very knowledgeable of electronics and do not want to fry anything.
Robert The more I learn, The more there is to learn! Orange Zone Dark Site 3 Mounts 4 Imaging Cameras 3 Guide Cameras OTA's = yes
LX850 blog: www.LX-850.com
personal website: www.wadsworthobservatory.com