Quote:I got one of these:http://www.coolerguys.com/840556089537.htmlIt controls two 40mm fans on the back of my C11. Easy to wire up.
Quote:The SilenX controller looks like a steal at $4.95. Why the three pin connector, is there a positve, negative and ground for reversible fans?
Quote:FWIW, I just went through all this with the Fox conn fan I scavenged from an old PC. I ended up using this:http://www.amazon.com/gp/product/B003L4KKF2/ref=oh_details_o01_s00_i04?ie=UTF...It controls the fan speed well, but has a mild squeal when the speed is slowed. Hope this helps.
Quote:Another option is to replace the current switch with a double pole double throw switch (On-off-on), and wire the two fans in series on one end, and in parallel on the other. Most fans start up ok with 6 v and run much quieter with less vibration. 12 v for cooling, 6 v for boundary scrubbing.Q