-Jarrod- Ahwahnee Hills Observatory 10" AT10rccf OTA Mounted on a Hypertuned Losmandy G11 Camera: Canon T4i http://www.astrobin.com/users/powerstroke01/
C14 EdgeHD, C11 EdgeHD Zhumell 8" f/6 Newt AP1200GTO, CGEM DX, CG5-ASGT Rob Miller Tri36M tripod Canon Rebel XS, Atik 314L+, DSI pro I,II, QHY5L-II SX 7 FW with Astrodon LRGB, Ha 5nm Hutech OAG5, Rainbow Optics Grating Scorpio Observatory
http://www.faintfuzzy.net Stuff C14, C8, Orion XX14i, Meade 8" ACF, AT6RC, AT102ED, Orion ED80, PST, AP1600GTO, CGE, CG5, ST10-XME/CFW8, QHY8PRO, Optec TCF-s, Microtouch Focuser, Pyxis LE, Hyperstar for C8.
Quote:Im lost. I thought my y axis was my RA. But i dont know now!This is with my Hypertuned G11 with Ovision worm.
Quote:Ive got another question. Heres my refined graph. Is that right that my periodic error should double?
Quote:The x vs y for the ra is all down to camera orientation....
Quote:Quote:Ive got another question. Heres my refined graph. Is that right that my periodic error should double? It depends... if the blue curve is the PE after applying the initial PEC curve, then it looks like it needs to be inverted and reloaded into the mount. This can happen if the calibration wizard's last step (step 4) wasn't done or that the manufacturer's implementation for PEC cell values is inverted from what PEMPro uses.-Ray