| BeeZer |
| (member) |
| 06/22/08 08:51 PM |
|
Re: Pentax K100D
|
hummm contrary information...
http://www.photography-forums.com/t81638-pentax-k100d-pentax-remote-assistant.html
I have a K200D and am going to try using the software just after I send this post.
I also read from the Pentax site that:
Quote:
NOTE: Before you download and install the Pentax Remote Assistant software, please do the following:
Check your camera's current firmware version, to verify that your camera fully supports the Pentax Remote Assistant software. To do this, hold down your camera's MENU button while turning the camera on. Your camera's LCD screen will display the current version of the firmware. Make sure your camera's firmware is version 1.11 or later. If you have an older version of the firmware, please update it to the most recent version (available separately from the Pentax USA download site ).
Does your camera have 1.11 or later firmware?