Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Guys, thank you for your support!
I open this new topic instead of the previous one. So...
The "first light" hasn't come yet, but maybe today ori tomorrow, it will!!!!
About the cable, I see that the scope uses only the 4 medium pins and not the ones that are at the far most. So even with a 4-pin RJ11 the scope will communicate normally as only 3 cables must be connected.
Furthermore, the RS232 (DB-9 connector) has already numbers for each hole so I think making this cable finally would be a breeze!
Just to keep in my mind the corresponding number of the pins and that's all.
I will make a ~15 meter cable (normal telephone cable) with the help of a friend (electronician).
About the DST I can't really find where in the remote control is the option to set it on or off. Is there a possibility the LX200 8" EMC (Classic) lucks this feature?
And I think the best is if DST will be off (or lucking any option) the time (GMT) to be set for me at -2 GMT, as the manual says that all eastern times right of Grinwick is set with a minus in front.
About Longitude, I also realized that I have a ~23o Longitude seeing by the google earth (my home). So the appropriate setting for my Longitude is (as described by the manual) in order to have the ONLY positive number to calculate 360o - 23o = 337o as my Longitude. That's is what is saying in the LX200 EMC Classic manual as all eastern Longitudes are minus and the remote only takes positive values. So the Longitudes starts positively by going left (to US, then China, Europe etc). That way I have to set all the way to the left , and that's why I must input the 337o.
All set and done I think.
PS: Correct me if I am wrong somewhere, OK?
Many thanks in adv,
George Altinakis
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
Edited by Altinakis (06/01/08 04:25 PM)
|
Locoweed
super member
Reged: 06/27/07
Posts: 107
Loc: Ft. Davis Texas
|
|
Hold down the alt key while inputing 0176 will give you the degree symbol°
|
Asturies
super member
Reged: 06/14/07
Posts: 165
Loc: La Mancha, Spain
|
|
In my computer if I press the key to the left of the number 1 appears º, but my computer also has an "ñ" it could be a different keyboard 
Don't you have this ºª\ key there?
Regards, Fernando
--------------------
LX90 12" with ultrawedge
Equinox 80mm APO
Mak-Cass 100mm f/14
PST Repaired of rusty objective
Canon EOS 350D
Brand new DBK21 for guiding and planetary
My web translated to English at last!!!
http://perso.wanadoo.es/jfa926/Fernando_Mejido/index.htm
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Guys, about the "o" symbol.
I don't have any problem with the PC keyboard.
I meant that I have to input that in the remote control of the LX200 :-)
The only question is how I input the DST (Daylight Saving TIme) in the remote. Is there an option in my LX200 EMC Classic remote control???
Thank you for your reply anyway...!
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
Asturies
super member
Reged: 06/14/07
Posts: 165
Loc: La Mancha, Spain
|
|
Ha!, ha!, Ok sorry, I was only a bit surprised with the º stuff.
Unfortunately I can't help you with the questión, my autostar is the I of the LX90, but I didn't have any problem with my instructions, just followed them and piece of cake.
Regards, Fernando
--------------------
LX90 12" with ultrawedge
Equinox 80mm APO
Mak-Cass 100mm f/14
PST Repaired of rusty objective
Canon EOS 350D
Brand new DBK21 for guiding and planetary
My web translated to English at last!!!
http://perso.wanadoo.es/jfa926/Fernando_Mejido/index.htm
|
southmike
Carpal Tunnel
Reged: 11/22/04
Posts: 2821
Loc: Fayetteville, NC
|
|
not sure I have never needed to go that high on my meade.
did you get the blue book with it?
--------------------
group scope pic
my refractors
LX200 10"-St120
LX200 8" f6.3-Orion 80ed
LX200 8" f10-Orion 90 Mak setup pic
Meade 102ED LXD650
Sky Watcher 100 ED Triplet prototype
Nexstar 5
etx125
etx70's
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Yeap! And it doesn't say anything about DST time.
Any ideas?
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
southmike
Carpal Tunnel
Reged: 11/22/04
Posts: 2821
Loc: Fayetteville, NC
|
|
pg 20 my book seems to hint that you use dst ..but then says if you are east of greenwich enter a minus gmt by moving the cursor backwards in the displayy with the w key, then press the next key to change the + to a -
which is interesting..sice you are gmt +2...this leads me to believe you were right the first time and your suppose to enter meade time conversion of -2.
(yet if you click the clock on windows and look up athens it is just +2)
unfortunatly it does seem that you are correct after all and the meade unit will take some trial and error testing.
once you get it set it will be accurate.
I cheat and use a star gps unit on mine.
I say do a two star alignment then snyc a target ,
then see what happens.
--------------------
group scope pic
my refractors
LX200 10"-St120
LX200 8" f6.3-Orion 80ed
LX200 8" f10-Orion 90 Mak setup pic
Meade 102ED LXD650
Sky Watcher 100 ED Triplet prototype
Nexstar 5
etx125
etx70's
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Thank you SouthMike!
At last a reasonable voice! (just joking)
I knew that I was right from the start about the Longitude and also for the DST option.
What I understand is that in LX200 EMC Classic there is NO option especially for the DST.
Instead the manual says that IF you want to use a DST time then simply add for the western places or abstract from the eastern places from the current Local Time.
E.g. If I live in Athens (Greece) and the GMT time here is +2 (-2 for LX200 EMC Classic, as the manual says) then my local time will be the normal one and if there is summer then I can add / abstract to the GMT +1 or -1.
All set and done then.
I am very eager to see my results when the clouds will fly away!
Good day to everybody!
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
southmike
Carpal Tunnel
Reged: 11/22/04
Posts: 2821
Loc: Fayetteville, NC
|
|
sorry it isn't a better answer
but maybe someone from italy or spain could chime in...
sounds like fernando is using the newer autostar.
the classic book is not European friendly...
might have a go at the lx200yahoo group.
but by the time you find out trial and error will work.
--------------------
group scope pic
my refractors
LX200 10"-St120
LX200 8" f6.3-Orion 80ed
LX200 8" f10-Orion 90 Mak setup pic
Meade 102ED LXD650
Sky Watcher 100 ED Triplet prototype
Nexstar 5
etx125
etx70's
|
Asturies
super member
Reged: 06/14/07
Posts: 165
Loc: La Mancha, Spain
|
|
Quote:
sounds like fernando is using the newer autostar.
the classic book is not European friendly...
Mine is not sane mind friendly, things are scattered without sense and important things (at least for me) like the sync option or how to enter R.A. and Dec, are in one of those TIPS apart from the main text. In the end I made a list with the important things so I don´t have to read the whole manual in the dark till I find what I'm looking for.
Next time I watch if it clears after two months of rains  I want to calibrate sensors and motors, so I will make a summary in a paper.
And yes southmike, mine is the autostarI, I think is different from the one Altinakis uses.
Regards, Fernando
--------------------
LX90 12" with ultrawedge
Equinox 80mm APO
Mak-Cass 100mm f/14
PST Repaired of rusty objective
Canon EOS 350D
Brand new DBK21 for guiding and planetary
My web translated to English at last!!!
http://perso.wanadoo.es/jfa926/Fernando_Mejido/index.htm
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Asturies, yes indeed, yours is different than mine.
Mine probably has a different (older) manual, so the instructions maybe differrent too.
Something else. I am ready to buy my first, decent eyepiece and I want a small help.
Due to financial restrictions this period, I am going to buy an Orthoscopic 6mm eyepiece from Baader. Is that OK with my configuration? F10 FL=2000mm. Using that eyepiece, I would achieve a ~333x magnification, which I found it quite good for my planetary observations. Am I right here or I can go ever higher (e.g. 5 or a 3.5mm eyeiece).
Thanks again!
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
Edited by Altinakis (06/07/08 05:49 PM)
|
Joad
Wordsmith
Reged: 03/22/05
Posts: 11919
|
|
I find that 333X is a bit high for my 8 inch Meade EMC, and I view under good conditions. In principle you can go to 400X with your scope, but I don't go higher than 285X, with a 7mm eyepiece. But 5mm might work for you.
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Is there any other suggestion for this telescope (F/10).
Any comments would be nice.
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
southmike
Carpal Tunnel
Reged: 11/22/04
Posts: 2821
Loc: Fayetteville, NC
|
|
8mm tv plossl or similar is a good eyepiece ..
do you like your zoom?
I have yet to find any 4, 5, or 6mm eyepiece I liked
(but I haven't tried many)
the celestron plossls made very good map/ star chart holders though
--------------------
group scope pic
my refractors
LX200 10"-St120
LX200 8" f6.3-Orion 80ed
LX200 8" f10-Orion 90 Mak setup pic
Meade 102ED LXD650
Sky Watcher 100 ED Triplet prototype
Nexstar 5
etx125
etx70's
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Southmike, can I go even lower ( in mm)?
My main goal is to achieve enough magnitude (over 300x) to see the Planets in full view.
I know that over 300x the image is most of the time degraded but I think with an 6mm ortho like the one from Baader will give a clean and bright image...
As for the Plossl I tell you what guys....
I have the Skywatcher SuperPlossl's 10mm and 25mm with FOV ~52o and price about 30 euros, here in Greece.
I tell you that these cheap EP's have a very nice and grispy image. They are also multicoated and very capable...
My main question now is if the 6mm will deserve its price (~67 euros).
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Joad the price here in Greece for the 7mm ortho is unfortunately ~99 euros.
So, 6mm is my "bargain" option....
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Guys, I just bought a Baader Ortho 6mm for pure planetary amusement.
Due to its sharp views I think I will be very happy finally with this buy.
Now, a problem came (as usual).....!
I made a RS232 cable for my LX200 but the funny thing is that nothing works.
Me and a friend sat down and made all the connections as shown in the manual. Telescope was ready, up and ready.
I loaded Astroplanner, no connection.
I loaded then TheSky v6. The same thing.
Finally I install ASCOM Drivers for Cartes Du Ciel program but still no connection.
I checked the connection (COM1 / COM2) nothing wrong.
My only thinking is as the following picture shows to invert the anti-symmetrically the telephone jacks in order not to be symmetrically on the wires...
Any ideas whatsoever?
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
Edited by Altinakis (06/14/08 04:47 PM)
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Guys, hi!
After a week I now tried with a new 4 pin cable and again no luck.
I loaded Astroplanner, no connection.
I loaded then TheSky v6. The same thing.
Also Cartes Du Ciel program but still no connection.
Is there maybe the test program (from Meade) in .bas file?
I don't to write all this basic commands (back in the '80's!!!)
Any ideas?
PS: Next check will be the serial connector itself (DB-9)....
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
southmike
Carpal Tunnel
Reged: 11/22/04
Posts: 2821
Loc: Fayetteville, NC
|
|
wrong com port?
maybe buy a cheap ebay cable...
--------------------
group scope pic
my refractors
LX200 10"-St120
LX200 8" f6.3-Orion 80ed
LX200 8" f10-Orion 90 Mak setup pic
Meade 102ED LXD650
Sky Watcher 100 ED Triplet prototype
Nexstar 5
etx125
etx70's
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
I tried both com ports but nothing happened Southymike...
Cable is a 4-pin telephone cable. I tried also with a smaller cable of 2m. Nothing.
I will call my friend to a) invert the telephone jacks
b) inspect the DB-8 RS232 connector again.
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Today I re-bought a new Baader Moon & Skyglow filter with Neodynium.
The thing is that I already had bought one for my SW last year (and I sold it) and the old one had a UV/IR-Cut Logo on it.
The new one (is it a new or the old version I wonder) hasn't this description and it only says 'Neodynium Moon & Skyglow filter 1.1/4' optically polished'
Why is this?
And what version is the newest?
Does the recent has also the capability of UV/IR Cut filtration???
Thanks in advance,
George Altinakis
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
southmike
Carpal Tunnel
Reged: 11/22/04
Posts: 2821
Loc: Fayetteville, NC
|
|
bummer , I have gone and lost my cable...
if I can find it ..I will have a look at it and see if anything might help..
--------------------
group scope pic
my refractors
LX200 10"-St120
LX200 8" f6.3-Orion 80ed
LX200 8" f10-Orion 90 Mak setup pic
Meade 102ED LXD650
Sky Watcher 100 ED Triplet prototype
Nexstar 5
etx125
etx70's
|
nashville
member
Reged: 03/19/08
Posts: 23
Loc: Nashville
|
|
I just went to look at my cables, if the catch pin on the end of the plug is faceing me on both ends, the wires are not in the same order. They are inverted from one end to the other.
--------------------
12" LX 200
Full set of meade 4000
Naglers, 20mm type 2, 7mm type unknown.
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Southmike and nashville thanks for your replies.
nashville that's good news.
I'll make a cable with inverted jacks to see what happens..!
I think this time will do!
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Hello, guys!
After nearly a month I finally had the time to enjoy my LX200 8".
Many things were seen on Thursday, so me and a buddy went on hunting.
One of the objects that we recorded was Jupiter.
At 666x, Jupiter was sharp and beautiful.
Below is a picture of that day.
Enjoy!
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Hi guys!
I have a small problem and I wonder if someone could help me.
In my LX200 8" Classic EMC, RA manual knob is broken.
I mean I took it that way but there is no prob with the Goto function.
The problem arise if I want to observe manually with the telescope using the manual knobs of RA and DEC.
The Ra knob is somehow completely loose. It goes crazy all the way and doesn't move the telescope in the RA direction. I feel that underneath there is no screw to hold or something.
The knob can't be taken as it is fixed from underneath, but no screw - I repeat - or resistance what's so ever.
My question is to the ones that they know:
is it really a mess to open the telescope and fix that problem?
Am I going to need something additionally or I can fix it my own?
Is it danderous if I leave it that way?
I repeat, the telescope functions perfectly with Goto feature.
Thanks in advance,
George Altinakis
Greece
--------------------
Meade LX200 8" EMC F10 (Classic) , Baader Ortho 6mm (Phantom), Hirsch Focal Reducer / Corrector f/6.3, Celestron Ultima Barlow 2x
Previous Stuff:
Skywatcher Dobsonian 8" , Meade ETX-70AT - Baader Hyperion Zoom 8-24mm, Televue Barlow 3x, Baader O-III & Moon SkyGlow & IR Cut,Telrad, Baader Microstage 6030, SW Erecting 1.5x, Panasonic Lumix DMC FX10 (30fps)
Destination Space!
Edited by Altinakis (07/14/08 03:10 PM)
|
southmike
Carpal Tunnel
Reged: 11/22/04
Posts: 2821
Loc: Fayetteville, NC
|
|
mine has a set screw ..yours soes too judging from the picture ...prob need sae allen wrenches..better yet the wrench that came with the scope. also you have to tighten or loosen the lever above it.
--------------------
group scope pic
my refractors
LX200 10"-St120
LX200 8" f6.3-Orion 80ed
LX200 8" f10-Orion 90 Mak setup pic
Meade 102ED LXD650
Sky Watcher 100 ED Triplet prototype
Nexstar 5
etx125
etx70's
|
Skywatchr
Carpal Tunnel
Reged: 06/03/06
Posts: 1580
Loc: North-Central Pa.
|
|
The RA slo-mo knob is mounted in an eccentric so it can be adjusted. There is a small set screw below the knob (NOT on the knob), in the black area. First find the allen wrench to fit the screw. Then grab the knob and hold it from dropping down, loosen the set screw on the eccentric and push the knob inward towards the base rotating it slightly. You should feel it meshing with the gear inside. Snug the set screw back up. If the knob moves up and down more than about 1/16" it is probably missing (not meshing with) the gear inside, you can pull the whole eccentric assembly out by loosening the same screw as above (NOT the knob screw) and lifting it straight up out. Then loosen the set screw on the knob and squeeze the small pinion gear and the knob to reseat it into the knob just enough so it still spins freely and has very little to no play. Return the assembly into the scope and adjust as above.
Jeff
Quote:
Hi guys!
I have a small problem and I wonder if someone could help me.
In my LX200 8" Classic EMC, RA manual knob is broken.
I mean I took it that way but there is no prob with the Goto function.
The problem arise if I want to observe manually with the telescope using the manual knobs of RA and DEC.
The Ra knob is somehow completely loose. It goes crazy all the way and doesn't move the telescope in the RA direction. I feel that underneath there is no screw to hold or something.
The knob can't be taken as it is fixed from underneath, but no screw - I repeat - or resistance what's so ever.
My question is to the ones that they know:
is it really a mess to open the telescope and fix that problem?
Am I going to need something additionally or I can fix it my own?
Is it danderous if I leave it that way?
I repeat, the telescope functions perfectly with Goto feature.
Thanks in advance,
George Altinakis
Greece
--------------------
18" F/5 Home-Built Dob. with Mike Dudley Mirror
Highly Modified Meade DS-16 in Roll Off Roof
6" F/15 Brass w/ D&G Lens on DS-16 Mount
DS-10 10" F/4.5 Newtonian
LXD650, LX200 Classic
Orange Tube C11
DayStar 0.45 with multiple ERFs
Vixen ED80sf
10" LX200 GPS SMT
11x80 Meade, 20x80 Celestron binocs (Japan Made).
Lots of Naglers and 8mm and 13mm Ethos.
Gadgets and parts everywhere.
And a Wife that loves it as much as me!
|
Altinakis
super member
Reged: 11/04/07
Posts: 110
Loc: Greece, Thessaloniki
|
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
[Re: