Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
Get a Cloudy Nights T-Shirt Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu uh, User

Equipment Discussions >> Mounts

Pages: 1 | 2 | 3 | (show all)
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Newbie w/ 11" Edge HD and CGEM - need Mount advice
      #4321076 - 01/17/11 06:00 PM Attachment (105 downloads)

I am 3 months into this great hobby and am getting a little better (see pics below) but am a VERY disappointed owner of certain products and VERY happy with others in just the 3 months and $10K I have put into it so far.

Specifically, I love the quality of the Explore Scientific, ADM and Baader products I have purchased. The quality of the Celestron products is not what I had expected. It takes all I can do to get my CGEM mount to track with nothing more than my 11" Edge HD, Canon 5D and a top mounted ED80 with a lodestar. That alone required me to purchase an extension counterweight system from ADM and hang 28 lbs way off into space. Forget pictures without the guidescope as the 11" weighs over 30 lbs alone and with the camera and (God forbid) a Dew Shield, it wouldn't track for a 25 second exposure.

Anyway, I am looking for suggestions for a new mount. I am very much into this and hate wasting time making cheap Chinese *BLEEP* that costs like it was out of Switzerland work for me.

I have seen (of course) that the CGEM DX was announced and am tempted to get one this March - but the QC on the product line concerns me. I am, however, addicted to using my Logitech Wingman and NexRemote setup.

Is there a mount that has the same remote gamepad and software slewing capability, truly CAN handle 40 lbs of equipment for photography, that itself doesn't weigh 200lbs and cost $5K out there? Sounds like a lot to ask.

Looking for advice and thanks again guys. I am here for the long haul.

Mike


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321081 - 01/17/11 06:02 PM Attachment (86 downloads)

And some of my work after 11 weeks since I bought my first scope and with no experience with any camera per se, least of all my Dad's 5D which I have been borrowing. I am determined to get better.

Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321084 - 01/17/11 06:02 PM Attachment (86 downloads)

M42 - 19x30s - 1600 iso - DSS

Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321091 - 01/17/11 06:04 PM Attachment (83 downloads)

Crab nebula. Two hours of exposures under poor conditions. Tried my first curve work in photoshop and the Starizona levelizer/zonemask products.

Check out bigger pictures in my new dedication section to this hobby on my website.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Eddgie
Postmaster
*****

Reged: 02/01/06

Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321160 - 01/17/11 06:25 PM

I am not at all surprised that the mount is not meeting your needs because it was probably designed for someone that needs less mount than you do.

Your load is not only heavy, the center of gravity is very far out due to the way you have mounted your ancillary components on top of the primary OTA.

Even if you get another mount, you might want to consider a side by side saddle setup.

Even a G11 I think is going to struggle with this particular load configuration. The more you raise the center of gravity, the more counterweights you need, and the more your stability suffers.

A G11 MIGHT do if you reconfigure your mounting.

Otherwise, you might want to go to a Titan or Astro Physics or something.

Seriously dude, your mount is overloaded in this configuration. Even if you reconfigured this particular mount with a side by side saddle, I think you would be pushing it.

Good luck.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Eddgie
Postmaster
*****

Reged: 02/01/06

Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321162 - 01/17/11 06:26 PM

Oh, and NICE pics!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Scotty H
super member


Reged: 11/15/10

Loc: Surrey,UK
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321205 - 01/17/11 06:44 PM

I dont want to sound too harsh but the CGEM mount with the 11HD is already at the top end of the mounts limit with the OTA, when you start puting all your AP equipment on said mount it's going to have problems unfortunately. However the pics you have uploaded are in no way bad at all
And if money is no object then i'd go for a Paramount etc.....

Edited by Scotty H (01/17/11 07:00 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
nemo129
Post Laureate
*****

Reged: 01/03/10

Loc: WMass
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321285 - 01/17/11 07:23 PM

Mike,
Nice pictures! I agree with the posters above, you are just asking too much of the CGEM. I know that Celestron marketed your set up for AP...and well...it will work for lunar and planetary...not so good for long exposures for DSOs. I am about in the same boat as you...I have a CGEM and the 11" EdgeHD. I did a little AP with the EdgeHD...then put it in its case and started shooting with my 80mm APO refractor and an AT8RC...it is so much more fun. I have resigned myself to the fact that I will probably need an AP900GTO to fufill my needs for AP with the 11" EdgeHD, so I started a seperate savings account for that. I have seen AP900GTO's go for as little as $6K used and new you will be over $9K...but I firmly believe you get what you pay for! Yes it would be nice if you could get a premium mount like an AP or a TAK for under $5K, but right now it just will not happen. I wish you luck as it sounds like you really like astrophtography.


Post Extras: Print Post   Remind Me!   Notify Moderator  
bardo
scholastic sledgehammer
*****

Reged: 09/13/09

Loc: US
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: nemo129]
      #4321324 - 01/17/11 07:40 PM

use your loadstar with an OAG and that will cut out a huge amount of weight.

Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: bardo]
      #4321477 - 01/17/11 08:43 PM

Thank you gents. I tried to do as much homework as possible before I purchased, but I have too little time and patience plus couldn't really find too much out. And when you are a newbie, the 'name' you have heard all your life as the leader tends to get favored. Childhood's End - again - like so many other things

From last to first reply:

Bardo, the OAG idea seems like a wonderful suggestion. Do you know if that has been done successfully and if so, would you rec the Celestron OAG product?

Nemo129, sorry about you having gone down the same road. I have been in RC helicopters and airplanes for many years and made a website that sold nothing but became popular for videos and brutally honest reviews back when the technology was starting. When I get into something I finish until I am either VERY good at it or beaten, and will document this experience on my website as time permits the same way I did my other interest - hopefully to benefit newbies. Does the AP900 or even the Celestron higher end mount provide any level of portability? I mean, less than 100 lbs with tripod or something one guy can setup by himself without wearing a hernia truss? If so, I am going to look into them because that is why I bought this CGEM/11" combo. I was new to the hobby and portability was required to bring the setups for use at dark sky locations during events i go to with my rc heli hobby. Money wasnt too much of a problem so much as the ability to transport the equipment away from my LP home location. I didnt even know those other manufacturers existed 12 weeks ago and getting the 200 lb hi end celestron mount didnt seem to fit the bill.

Eddgie, as i wrote in another post, i didnt mean to bad mouth the celestron product so much as their marketing. The cgem / 11" edge hd combo is pitched as AP ready and I even called to ask before i bought it. If it was sold as visual it would have been a little more honest thats all. I do have an adm sbs V system that i tried on the cgem with the 8se and ed80/lodestar and it was much better. I am not sure the additional 4 or 5 lbs the sbs system adds to the 11" ota doesnt break even on the current setup, but will try.
If there are any mounts that can be SUV portable that handle an 11" sct and guidescope, I will likely pay the price and add the cgem to my 8se and its mount to the 'sell at a loss' bucket (and never sell it). The price of not doing enough homework i guess.

Thanks Scotty. I am proud of them with only 6 weeks in the hobby and never even having used a hi end DSLR before (the one I am using is my Dad's I borrowed it permanently I suspect). Problem is the CGEM works ok about 25% of my setups. Not to be mean to celestron but this is a good product that is just oversold. I will keep trying and keep posting and building the AP section of my website or setup a new one to document the experience and help newbies/users get the straight skinny. Wish I spent more time on this great forum before I purchased, but that's why EBay was invented anyway! The forums in the RC heli business became controlled and you couldn't post an honest review. This one seems different. All for fun anyway but my time is precious and it is frustrating to have rooms full of stuff that i buy to get to the right setups.

Cost be damned, any suggestions for the best mount for AP with 35-50 lbs of equipment, that can be SUV transported and setup by one person, that is as computer / wingman remote friendly (I like Nexremote) as the CGEM - are all welcome and appreciated. Or recs like the OAG idea above!

Thanks again,

Mike

Edited by MadMan (01/17/11 08:48 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
bardo
scholastic sledgehammer
*****

Reged: 09/13/09

Loc: US
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321538 - 01/17/11 09:12 PM

AP mach1...if costs be damned. as for an OAG i dont know. i use an orion deluxe and its alright. with the loadstar you wont have to do any hunting for guidestars, which is the reason many dont like an OAG. but for you any decent one should be just fine. also you could consider a kwiq guider or even adaptive optics.

Post Extras: Print Post   Remind Me!   Notify Moderator  
gdd
Pooh-Bah


Reged: 11/23/05

Loc: N Seattle suburb, WA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: bardo]
      #4321604 - 01/17/11 09:39 PM

Hi Mike,

The CGEM comes bundled with choices of C8, C9.25, and C11 which suggests the C11 will be at the limits of the mount's capabilities. As to whether the CGEM as suitable for AP with a C11 - that question can be answered yes or no depending what limitations you are willing to accept. For example, AP at the C11's native FL for hour long exposures with narrowband imaging and no OAG guide stars may be beyond that limit.

I looked at full sized pictures on your website. They looked really good to me. I noticed most astrophotographers do not seem to publish their images at actual size but at a reduced size to really sharpen them up and reduce star bloat.

So can the CGEM/C11 combo do AP? Yes it can. But if you want to take the C11 to the limit you may need a top-tier mount.

Other mounts for under 5K include used the used CGE and perhaps the G11 with a one piece wormblock upgrade. Another trick I saw one person do was to undersling the guide scope. You can also buy a more sturdy tripod or even a pier to increase the load capacity of your CGEM.

I am also a newbie, still in the R&D stage, so this is just of rehash of what I have read elsewhere.



Gale

Edited by gdd (01/17/11 09:46 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: gdd]
      #4321821 - 01/17/11 11:38 PM

Bardo, thanks man. THe Kiwguider looks like something I can make with my extra Explore Scientific finder scope (got the ED127 coming in addition to the ED80 I have) by adapting the lodestar directly to it. Will have to see if that works and if I can get the back focus. On another note, glad I posted today because I didn't even know anything like adaptive optics existed and am now reading about it.

GDD, you are doing some smart R&D and thank you very much for your compliments about the photos. The R&D takes a lot of time as I am sure you are finding out - especially if you don't know much about the hobby.

FYI - and based soley on my experience over about 20 trial nights, the C11 ability to get exposures regardless of how well the CGEM is balanced along all axes without a guidescope/camera is VERY limited - and I mean like 30 seconds. With a guidescope and camera, and I mean a GOOD one like I have with the lodestar, it is hit and miss due to approaching 40 lbs and very dependent on which side of the meridian you are on vis-a-vie tail or top heavy balance and all sorts of other conditions. I am running about a 25% hit rate with balance and the pictures you see are the 3 that were pretty successful out of over 20 attempts and multiple hours of wasted time. The longest exposure I have gotten (and it had SOME star trailing in it) with perfect conditions and luck was 10 minutes.

GDD, you seem to really be doing your homework. Do you know anything about the weight of the CGE and can you point me at any articles or links regarding the G11 with the wormblock upgrade, the undersling trick or info on 'piers' or tripod adaption of the CGEM? WOuld be VERY appreciated.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Peter in Reno
Postmaster
*****

Reged: 07/15/08

Loc: Reno, NV
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4321880 - 01/18/11 12:08 AM

OAG is the best guiding method because it eliminates flexure. With a guide scope, there will always be flexure between guide scope and imaging scope no matter how tight.

I used to have a guide scope guiding an SCT and I had nothing but problems. I replaced the guide scope with OAG and problem quickly disappeared.

I also have Lodestar and I never have problems finding a guide star with CPC0800 thanks to high sensitivity Lodestar.

I highly suggest you to try out OAG. My OAG is Hutech OAG and it's one of the best. It costs more than Celestron OAG but worth every penny.

http://www.sciencecenter.net/hutech/mitsub/oag.htm

Peter


Post Extras: Print Post   Remind Me!   Notify Moderator  
gdd
Pooh-Bah


Reged: 11/23/05

Loc: N Seattle suburb, WA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4322092 - 01/18/11 04:28 AM

Hi Mike,

You will find a lot of links about CGEMS at the Yahoo site "CelestronCGEM". For the G11 there is the LosmandyUsers and GeminiUsers Yahoo sites. You will find lots of threads articles on piers, tripods, reducing periodic errors. Of course there is a lot of info here at CN also.

The consensus seems to be a pier is the most stable platform on which to place your mount. A heavy duty tripod like the Berleback Planet is also frequently mentioned.


The PemPro software is used to measure the period error of your mount, find what part of your mount is mechanically deficient, and measure flexure. It will help you decide what corrections you need to make. Flexure tends to magnify the effects of period error.

For unguided tracking (no autoguider) you need low periodic error. For that you need smooth bearings and and a precision worm. People attempting to take their CGEM mount to the limit will use a hypertuning service to make mechanical improvments. A popular service is
http://www.deepspaceproducts.com/hypertune-service-for-the-celestron-cgem-mount_8_4226_8661.html. They recently added a high precision ring gear/worm replacement for $500 for each access. This is the ultimate and most expensive upgrade for lowering periodic error, so carefully consider whether you really need it.

The Off Axis Guiders (OAG) are best because they add little weight and allow you to remove your guide scope. It's limitation is the need for relatively bright guide stars, hard to come by when imaging at F10 like you are. If you later get into narrowband imaging the guide stars will be many times dimmer, so OAG would not work. This is where you need to lower your periodic error so you can minimize the work your autoguider needs to perform.

I will look around for that underslung guider. I remember it needed to be small (a 50mm finder scope I think) that was mounted on the underside of the the mount saddle.


Gale


Post Extras: Print Post   Remind Me!   Notify Moderator  
nemo129
Post Laureate
*****

Reged: 01/03/10

Loc: WMass
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4322268 - 01/18/11 08:17 AM

Quote:

Does the AP900 or even the Celestron higher end mount provide any level of portability?




Mike,
I bought the "C" setup over a year ago before I had done enough research (I was then new to GEMs)...so my fault! As far as the AP900 being portable, I have seen personally and read reports here on CN from lots of folks using it as a portable mount either on tripods or portable piers. I have done better research on this one. Painful Le$$on learned!


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: nemo129]
      #4322342 - 01/18/11 09:05 AM

Thank you guys. Very useful informtion. I think the best approach initially while I research my next mount will be to get a good OAG. Peter, I am going to look into the Hutech today.

Mike


Post Extras: Print Post   Remind Me!   Notify Moderator  
gdd
Pooh-Bah


Reged: 11/23/05

Loc: N Seattle suburb, WA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4322389 - 01/18/11 09:28 AM

Another option when for high resolution AP is to upgrade the camera from a DSLR to a SBIG A08. With normal autoguiding the mount motors must move the entire mass of the mount, telescope and all the photographic equipement. The A08 uses adaptive optics, only a mirror in the camera moves.

Gale


Post Extras: Print Post   Remind Me!   Notify Moderator  
bobhen
professor emeritus


Reged: 06/25/05

Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: gdd]
      #4322445 - 01/18/11 09:58 AM

If you are serious about imaging and producing quality images with repeatable results and the least amount of frustration (and it sounds like you are) then the most important part of your set up will be the mount. And as you are learning, its not an area where you want to skimp.

The next mount you should seriously consider is one of mounts from Astro-Physics. They are designed with the imager in mind. Just chose the mount that fits your load, portability needs, and budget. Oh, and you can actually call them and tell them what you are trying to achieve. They will be more than happy to make a mount recommendation. Take their advice and you will see an improvement from the first night out.

Bob


Post Extras: Print Post   Remind Me!   Notify Moderator  
Peter in Reno
Postmaster
*****

Reged: 07/15/08

Loc: Reno, NV
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: gdd]
      #4322462 - 01/18/11 10:09 AM

Quote:

The Off Axis Guiders (OAG) are best because they add little weight and allow you to remove your guide scope. It's limitation is the need for relatively bright guide stars, hard to come by when imaging at F10 like you are. If you later get into narrowband imaging the guide stars will be many times dimmer, so OAG would not work. This is where you need to lower your periodic error so you can minimize the work your autoguider needs to perform.




You can put any filter BEHIND the OAG so guide camera will not be filtered. In other words, place the filter in between OAG and imaging camera.

I have imaged at f/10 with C-8 and never had problems finding a guide star with Lodestar.

Astro-Physics Mach1GTO should easily handle a C-11. It has a 45lbs imaging capacity.

Peter


Post Extras: Print Post   Remind Me!   Notify Moderator  
gdd
Pooh-Bah


Reged: 11/23/05

Loc: N Seattle suburb, WA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: Peter in Reno]
      #4322512 - 01/18/11 10:38 AM

Quote:



Quote:
--------------------------------------------------------------------------------

The Off Axis Guiders (OAG) are best because they add little weight and allow you to remove your guide scope. It's limitation is the need for relatively bright guide stars, hard to come by when imaging at F10 like you are. If you later get into narrowband imaging the guide stars will be many times dimmer, so OAG would not work. This is where you need to lower your periodic error so you can minimize the work your autoguider needs to perform.


--------------------------------------------------------------------------------



You can put any filter BEHIND the OAG so guide camera will not be filtered. In other words, place the filter in between OAG and imaging camera.

I have imaged at f/10 with C-8 and never had problems finding a guide star with Lodestar.

Astro-Physics Mach1GTO should easily handle a C-11. It has a 45lbs imaging capacity.

Peter





Hi Peter,

I was thinking about the placement of the filter after I posted my comment, I may not have been accurate but was confusing OA with AO. Isn't the AO device doing its own guiding independently of the autoguider (if you are using one) and also doing the imaging, therefore filter placement would be important?

Thanks for the information on the LoadStar capabilities with slow optics.


Gale


Post Extras: Print Post   Remind Me!   Notify Moderator  
gillmj24
Post Laureate
*****

Reged: 12/06/05

Loc: PA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: Peter in Reno]
      #4322521 - 01/18/11 10:41 AM

Seeing these pictures reminds me of the movie Mr Baseball when hotshot Tom Selleck's character first gets to take batting practice in front of his new japanese manager. hitting most of them out of the park too.

Uchiyama-san: "You have a hole in your swing."
Jack Elliot: "Ball can't seem to find it."


You seem to be doing a fine job even with a maxed-out mount!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Peter in Reno
Postmaster
*****

Reged: 07/15/08

Loc: Reno, NV
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: gdd]
      #4322531 - 01/18/11 10:46 AM Attachment (39 downloads)

Quote:

Hi Peter,

I was thinking about the placement of the filter after I posted my comment, I may not have been accurate but was confusing OA with AO. Isn't the AO device doing its own guiding independently of the autoguider (if you are using one) and also doing the imaging, therefore filter placement would be important?

Thanks for the information on the LoadStar capabilities with slow optics.


Gale




I have never use AO but I have seen pictures of SX AO with OAG and you can still put filters behind OAG.

http://www.starlight-xpress.co.uk/SXV-AO.htm

Peter


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: Peter in Reno]
      #4322534 - 01/18/11 10:47 AM

GDD, have thought about the AO8 but probably after I get stability and weight down in general.

Bobhen, they have a PHONE number and someone ANSWERS? Will wonders never cease . AP is first on my research list from the feedback so far. Right after I get an OAG which is the first thing to do to put to bed any question about the CGEM and likely useful in any setup down the road regardless.

Peter, good to know. Does Hutech provide any help in selecting the proper equipment for my setup and is the OAG 'portable' between, say, the visual back on my C11" SCT and the ED127 refractor tube I will be using as another AP platform option?

Joseph, thank you but have a long way to go. Going to take years I suspect - and lots of cash

Edited by MadMan (01/18/11 10:50 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Peter in Reno
Postmaster
*****

Reged: 07/15/08

Loc: Reno, NV
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4322571 - 01/18/11 11:08 AM Attachment (43 downloads)

Hutech has all the necessary adapters to work with their OAG. Mine is OAG5 which is a little smaller than the more expensive and larger OAG6. Hutech will be more than happy to help you select the right components to meet your needs. They have the right parts for both of your scopes. Also, the OAG replaces the visual back and threads directly to the rear cell of C-11 to eliminate flexure. For your refractor, Hutech offers 2" nosepiece to adapt to refractor focuser.

Hutech OAG6 might be better because your C-11 has a wide 3.25" opening but it may be too big for your refractor. There are limited number of adapters for OAG6 and will be pretty expensive.

This is my OAG setup with SXVR-M25C camera and focal reducer. The 2" IDAS LPS filter is hidden inside and right before the camera.

Peter


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: Peter in Reno]
      #4322640 - 01/18/11 11:40 AM

Thanks Peter, my 2" Baader kwic lock visual back threads onto the C11" just fine given that you can leave the first section on the scope and 2" threads are provided rather than having to use the 3.25". So I might be able to get away with a multi-scope AOG. Very good to know that they take calls and can help at Hutech.

Your setup looks great. I notice you are direct guiding with the lodestar. Given that I am using the NextRemote software and a Logitech wingman for remote wireless slewing, I run a virtual USB port setup with the lodestar. I am betting that doesn't help things either as it relates to guiding with PHD.


Post Extras: Print Post   Remind Me!   Notify Moderator  
CounterWeight
Postmaster
*****

Reged: 10/05/08

Loc: Palo alto, CA.
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: gillmj24]
      #4322661 - 01/18/11 11:51 AM

Welcome to CN and my compliments on your images - very nice. I began to study astronomy at college in the mid 70's and I'm always amazed that folks in their backyards can now get images that far surpass those in my textbooks from 35 years ago! And it's a bit intoxicating once done... who would look at those images and say there is a problem? Not me! But I went down this road 2 years to 1 year ago and realize that there is a lot behind getting a good image that no-one can see. Heck I gave up trying with my pre-edge HD C11` and went with lensed scopes.

Great posts about reducing load by changing guiding (I disagree about 'always diff flexure' being a problem) but be aware the other guiding options can also have some learning curve and issues to iron out. Agree too that anything will work relatively better on a fixed concrete reinforced or metal pier. I've been observing for many years, and started trying to do imaging in late 08/early 09, so am no expert. Visual is about the scope mostly (sure the mount matters too but scope more), imaging is about the mount (and here sure the scope matters ,too but not as much). Just as ratio of imporatce in critical paramer. I also received a diploma in 'C' anguish. I also use a piggyback guidescope and like the counterweight example on the Casssidy site. Top markes for his gear as well.

My pessimistic answer for imaging is "No", there isn't. Some better than other, but overall still no.

Though an A-P mount is easily double the investment of many other mounts, it is a fraction to 'near zero' the hassle and problems. In my experience 'near zero' if not zero... I used the C mount, Logitec/NexRemote and Ascom etc with The Sky and thought fantastic too, but I'm sure there's a way to do that with an A-P mount if desired.

You are fortunate in a way not to be using a long triplet refractor as I am - the weight on mine is much farther from center on one axis and closer in on the other. But it's still weight. And though it only in the low/mid 30 lb class it crushed the marginal performance of a CGE to completely unacceptable. A bitter and costly lesson. Where I live the imaging opportunities are 'infrequent' and wasting one or two or three was a huge percentage of the overall... an example - misssing Orion objects completely one year due to mount 'issues'.

Sorry my response so wordy. I'm not a paid rep of anyone, only hope to save anyone the anguish I went through. Imaging gets $$ quick. Buying things more than once just makes it even more $$. The difference between my Mach-1 rated 45lbs imaging? and my CGE rated ~??60?? lbs for 'something undefined but fits the marketing dept.' was and is DAY AND NIGHT. Absolutly no crossover grey area. I am not a snob and no 'money to burn' on this. As a function of what I consider "VALUE" for the $$ spent... the A-P Mach-1 is actually IMO quite a bargain. An expensive bargain yes, but you do actually get what you pay for. And you still get it the next year... and... it's why you don't see constant threads about needing to fix, upgrade, hypertune, modify, power issues, [place whatever here]... and all the rest. So my take... the best 'fix' is to bite the bullet (if the $ makes need) and buy the right tool for the job to begin with.


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: CounterWeight]
      #4324363 - 01/19/11 01:53 AM

Well, now that I have thought this through in my rather dense way, I have ruled OAG out for the moment as I have a Hyperstar coming this week for the C11" Edge HD.

That means I am looking at a finderscope/guidescope option like the Kwiq. But even that doesn't fit the bill because I have the Lodestar camera and I need a compression fit.

I also would like to move the finder/guidescope/Lodestar as a unit between AP platforms (they being both the C11" with Hyperstar and the new ED127 I have coming).

The perfect situation would be to modify what will be one excess Explore Scientific 50 mm finderscope to take a 1.25" compression adapter, put it on a set of small rings with a Vixen sized clamp underneath. Then it could ride on EITHER the long dovetail I have now on the 11" SCT or be moved to a short Vixen dovetail I will install on the handle of the ED127.

I have two ES illuminated 50 finders and one excess Celestron 50 finder - so one is excess with the preference being whichever the heck is easiest to make this work.

Suggestions welcome and thanks again to everybody for treating dumb newbie questions with such sincere help.

Mike

Edited by MadMan (01/19/11 01:54 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
bardo
scholastic sledgehammer
*****

Reged: 09/13/09

Loc: US
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4324401 - 01/19/11 02:51 AM

sounds like a good plan. its what i am doing now in fact. i use the ADM vixen rings and it makes it easy to swap between the two as the clamps come apart in two pieces instead of just slipping off the end of the dovetail.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Falcon-
Post Laureate
*****

Reged: 09/11/09

Loc: Gambier Island, BC, Canada
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: bardo]
      #4324453 - 01/19/11 04:20 AM

Quote:

That means I am looking at a finderscope/guidescope option like the Kwiq. But even that doesn't fit the bill because I have the Lodestar camera and I need a compression fit.




If you are talking about the same sort of "compression" that is found in standard 1.25" eyepiece holder then I believe that *IS* what the KWIQ-S Optical Package has.

Unlike the KWIQ-Guider that is designed for the QHY5/SSAG the KWIQ-S package is specifically intended for a provide-your-own-guide-cam setup.


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: Falcon-]
      #4324748 - 01/19/11 09:57 AM

If that is the case, I am good! I spoke to Brian at Kwiq yesterday and must have misunderstood. Will clear it up and just order one if I have to.

Mike


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4325095 - 01/19/11 12:47 PM

Bardo,

How did you actually end up making or buying your finder/guidescope conversion for use with your guidecam? Does it have a compression ring setup?

BTW, your website rules.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Bowmoreman
Clear enough skies
*****

Reged: 09/11/06

Loc: Bolton, MA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4325162 - 01/19/11 01:22 PM

Hi Mike, here's another thought on the Mount front, which may meet many of your criteria:

1) I also would highly recommend a mount like AP900, Losmandy Titan and/or Takahashi EM400 - if you're going NEW; these are probably your best 3 bets for the scopes you have, etc...

2) Another approach - perhaps while you AWAIT that AP900 (or other) new - as there is likely to be quite a wait...

Try and find a used Celestron CGE, of fairly recent (post 2006 or so) vintage...

I had excellent luck with my Side by Side setup of Refractor and C11 on it, with exposures with good guiding/tracking up to 10-15 minutes.

It would even use the same remote software you've come to know/love.

It'd run you around $2000 - $2200 depending. It is a much more capable mount than the CGEM. Couple of foibles (you'll want to replace the stock motor cables with flexible ones from VIP - the so-called "Marty's Cables" modification - do a google on it!)...

Then, when your "dream mount" arrives, just sell it used for probably little (maybe no) actual "loss"

Other mount to consider used to do the same thing might be a Losmandy G11; it could handle you in SBS mode.

One comment on your SBS setup (from ADM), I believe you mentioned you had the "V" (Vixen) variant. Sell that, and replace it with the Losmandy "D" variant; a C11 will strain a V dovetail/bar setup... (again, from personal experience).

Finally, another alternative; when you get (and start using) your Hyperstar, you MAY find that because your exposures will be SO short, that the CGEM actually is "more than good enough" (at that focal length - 560mm, and the 30-90 second exposures you're doing)...

So, unless/until you want/need to shoot at 2800mm f/l, you might not need to do anything.

On guiding: I have had fantastic luck using an SBIG STV, which I got used almost 3 years ago (for $1100, they're now quite a bit less). I use the SBIG eFinder (basically a 100mm, f/40 "lens") directly on the camera, and then mount the camera UNDER the C11 into the same plate. This has the benefit of being VERY lightweight, and highly precise, plus the inertial moment helps to OFFSET the other weight ABOVE the DEC plane...

(I know you have the Lodestar already, but, just a thought...)

final thoughts, in addition to used AP900/Tak EM400/Losmandy Tital, consider other used mounts that are no longer made new to be your "life" mount:

Takahashi NJP
Mountain Instruments MI-250

Each of which is extremely well made, and capable of eating your load for lunch for quality AP.

Good to have you here on CN!


Post Extras: Print Post   Remind Me!   Notify Moderator  
bardo
scholastic sledgehammer
*****

Reged: 09/13/09

Loc: US
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4325183 - 01/19/11 01:33 PM

thanks!

I dont use a finder as of right now. i just meant that i setup my guidesystem the same as you plan to do...with the clamps and rings on a vixen rail to swap between scopes.


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: bardo]
      #4325302 - 01/19/11 02:22 PM

Thanks Bardo. I get it.

Bowmoreman: Very appreciated, thoughtful analysis. Only a couple of questions on this:

- Do you know what the all in weight of the CGE setup it? My goal is to have something transportable in my SUV to various events I attend in areas of dark sky and be able to setup alone. I had no idea you could buy the Celestron CGE mount used in the $2K area. Isn't that a $5K product? If so, unfortunate statement for that line but great idea.

- I had the "D" SBS bar but because I never anticipated using the 11" and any refractor with CGEM in an SBS, I swapped it for the V center section. I assumes the CGEM would hold the ED127 and an ED80 in an SBS on that 'Vixen' setup. Think that will flex too much as well?

Thanks again,

Mike


Post Extras: Print Post   Remind Me!   Notify Moderator  
Bowmoreman
Clear enough skies
*****

Reged: 09/11/06

Loc: Bolton, MA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4325770 - 01/19/11 05:59 PM

To your questions:

CGE had no single part more than about 30-35# as I recall... I found it easy to assemble, and disassemble... total weight IIRC is around 100 pounds spread across the "parts"...

CGE New was a $3000 mount. It is NOT in the class of the $5K and up mounts, but certainly out-carries anything below it's class (including the CGEM which unfortunately "killed it").

If you can find a used one, it is a great bargain right now; a far more capable mount than the Atlas, or CGEM. Jury's out on G11 versus CGE IMHO...

I think an ED127 and 80mm scope would be ok SBS on V-setup, but I know a C11 and 80mm was NOT (from direct experience).

Again, hope this is helpful!

Edited by Bowmoreman (01/19/11 06:01 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
WayneJ
Carpal Tunnel
*****

Reged: 08/20/09

Loc: West Chester, PA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4325834 - 01/19/11 06:23 PM

Quote:

I had no idea you could buy the Celestron CGE mount used in the $2K area. Isn't that a $5K product? If so, unfortunate statement for that line but great idea.




You're thinking of the CGE Pro. That mount is part of Celestron's current product line and sells for $5k.

It's somewhat portable. It's very easy to break-down and assemble quickly, provided you don't mind that a number of pieces are in the 40 lb range... and that you don't mind the sheer size. The CGE Pro is a rather beastly large mount compared to the CGEM-class of mounts.

Regards,

Wayne


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: Bowmoreman]
      #4325908 - 01/19/11 06:47 PM

I am sorry, I confused it with the CGE Pro. I have only been in the hobby for a couple of months.

Thanks for the warm and fuzzy on the 127/80 VSBS.


Post Extras: Print Post   Remind Me!   Notify Moderator  
freestar8n
Post Laureate
*****

Reged: 10/12/07

Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4326977 - 01/20/11 09:23 AM

Your images show you are at the very high end in terms of getting good results quickly with humble equipment. I don't know your full thinking on where you want to go now, but I would add to what some people have said - you are already getting good results and you could improve them and reduce the mount load by switching to OAG. I know you want to use hyperstar - but if your mount is polar aligned and you use PEC, you may be able to do acceptably with unguided short exposures, throwing away a few bad subs in each session. Or you could use oag now and short, light guidescope later for hyperstar.

Of course - a bigger and better mount is always good - but you are starting at a pretty high level, and even if you did get a better mount, you would probably want OAG to get best results at long focal length.

Frank


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: freestar8n]
      #4328279 - 01/20/11 07:25 PM

Thanks freestar8n. I am going to hold off on the mount and lighten my load by putting my Lodestar guidecam into a set of Kwiq optics. I will put that on the 11" and take everything else off and use it for Hyperstar.

Holding off on OAG as well for now because can't use it with Hyperstar where the camera is up front.

I am also going to try non-Hyperstar imaging with the new ED127 I just got today with the same, mobile light finder/guide scope at f7.5. That scope is probably 10 lbs lighter than the C11". When the flattener/reducer is available from Explore Scientific for this scope (next week I hope), I will try and shorten the focal length.

Then, if between BOTH of those now lighted setups on CGEM don't cut it, on to new mount research and I will use this mount for visual with whatever setup is not being used for AP while the freezing hours tick away as the Canon goes 'ka-klick' all night long

Hopefully, it's a plan and I have this thread and you guys to thank for helping me at least come up with an intermediate concept to a new mount and also for introducing me to AOG/Guidecam and Adaptive Optics concepts - which I never knew existed.

Mike

Edited by MadMan (01/20/11 07:27 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tiny
scholastic sledgehammer


Reged: 05/02/08

Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: MadMan]
      #4330858 - 01/21/11 10:10 PM

If you do end up going forward with the new mount path the Titan would probably be your best bang for buck mount at the moment and unlike some others [AstroPhysics] it should be readily available once the Gemini update is finalized. Also costs a few thousand less compared to Tak and AP.

Post Extras: Print Post   Remind Me!   Notify Moderator  
gdd
Pooh-Bah


Reged: 11/23/05

Loc: N Seattle suburb, WA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: Tiny]
      #4331147 - 01/22/11 12:45 AM

The Titan head breaks into 2 equally heavy (about 35 pound) halves making it more portable than the CGE-Pro which breaks into a 55 pound piece and a 20 pound piece.

Gale


Post Extras: Print Post   Remind Me!   Notify Moderator  
MadMan
sage


Reged: 10/31/10

Loc: Canton, GA, USA
Re: Newbie w/ 11" Edge HD and CGEM - need Mount advice new [Re: gdd]
      #4331232 - 01/22/11 02:39 AM

Sounds like the one to look at. From what I saw tonight briefly, the CGEM is behaving quite well with a lightened load. So far.

Just can't put the Celestron scope on it plus a dew shield and a camera or it tracks poorly. It liked an ED127 SBS with an ED80 guiding.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | 3 | (show all)


Extra information
19 registered and 38 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 3639

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics