Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
Get a Cloudy Nights T-Shirt Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green GuÖ uh, User

Equipment Discussions >> Mounts

Pages: 1 | 2 | (show all)
mistyridge
Post Laureate
*****

Reged: 10/28/05

Loc: Loomis, CA
The future of mounts--any thoughts?
      #4386458 - 02/14/11 06:02 PM

I just finished skimming the latest issue of ATT and was struck by what I see as a trend in mounts. Spcifically self aligning technology such as the new Celestron Prodigy and Mead Lightswitch may lead to larger capacity high end mounts suitable for AP. Will GEMs become obsolete? Will having to do polar alignment be a thing of the past? Will we see portable self aligning harmonic drive mounts, light weight with no counter weights?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Astrojensen
Post Laureate
*****

Reged: 10/05/08

Loc: Bornholm, Denmark
Re: The future of mounts--any thoughts? new [Re: mistyridge]
      #4386491 - 02/14/11 06:24 PM

Quote:

Spcifically self aligning technology such as the new Celestron Prodigy and Mead Lightswitch may lead to larger capacity high end mounts suitable for AP.




Why would these small self-aligning mounts lead to big mounts suitable for astrophotography? They are made for very different markets.

Quote:

Will having to do polar alignment be a thing of the past?




Not if you want to do long-exposure photography with no field rotation, but I think there's a good chance that mounts will be developed that can do it themselves with very, VERY high accuracy. All it would take was some motors on the altitude and azimut adjustments on a GEM, a CCD camera and a computer that could talk with the camera, the mount and the adjustment motors and then run an automated drift alignment procedure. Given the sensitivity of the CCD, it could probably be done in a few minutes.

Quote:

Will we see portable self aligning harmonic drive mounts, light weight with no counter weights?




Interesting. Maybe, I'd say, but not likely in the next five years. Still too expensive.

Quote:

Will GEMs become obsolete?




Hardly.


Clear skies!
Thomas, Denmark


Post Extras: Print Post   Remind Me!   Notify Moderator  
Frank Boreas
member


Reged: 11/02/10

Loc: Northern Wisconsin
Re: The future of mounts--any thoughts? new [Re: mistyridge]
      #4386494 - 02/14/11 06:26 PM

Did astrophotography make eyepieces obsolete?

Did goto make starhopping a thing of the past?

For some yes, but I suspect there will always be some like me that enjoy simple setups and observing au natural.

Edited by Frank Boreas (02/14/11 06:27 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
skybsd
Post Laureate
*****

Reged: 02/01/08

Re: The future of mounts--any thoughts? new [Re: mistyridge]
      #4386528 - 02/14/11 06:42 PM

Reminds me of the kind of stuff my Dad told me they were told back in the '60s - good thing he didn't hold his breadth waiting for those personal hovercrafts

Regards,

skybsd


Post Extras: Print Post   Remind Me!   Notify Moderator  
EJN
Carpal Tunnel
*****

Reged: 11/01/05

Loc: 53 miles west of Venus
Re: The future of mounts--any thoughts? new [Re: mistyridge]
      #4386556 - 02/14/11 07:00 PM

In the future, as mental powers improve, people will learn to
levitate their telescopes using psychic energy and mounts will
be unnecessary.


Post Extras: Print Post   Remind Me!   Notify Moderator  
tjugo
scholastic sledgehammer


Reged: 11/06/07

Re: The future of mounts--any thoughts? new [Re: EJN]
      #4386969 - 02/14/11 10:21 PM

Some of the newer mounts (ASA) don't need to be autoguide... At least I expect in the next 5 years a mount in the class of CGEM/Atlas that won't need to be autoguided...

Cheers,

Jose


Post Extras: Print Post   Remind Me!   Notify Moderator  
mistyridge
Post Laureate
*****

Reged: 10/28/05

Loc: Loomis, CA
Re: The future of mounts--any thoughts? new [Re: tjugo]
      #4387267 - 02/15/11 02:37 AM

I guess we are doomed to be stuck in the past. Look to China for innovation.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Chris Lyons
member


Reged: 12/28/09

Loc: Baltimore
Re: The future of mounts--any thoughts? new [Re: tjugo]
      #4387303 - 02/15/11 03:33 AM

Hi Jose!
My A.S.A. DDM-85 does need to be autoguided beyond
around 30-40 mins but that's probably a result
of flexure in my OTA rings. Getting rid of that
is proving to be a bear!
The DDM-85 could probably go without guiding for
hours if the flexure issue was banished but how
long in reality I couldn't say. Not yet anyhow!
This direct drive tech is mind blowing and there
is no going back now to anything less.
The future of mount tech is BRIGHT!
Chris Lyons.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waxing Gibbous
professor emeritus


Reged: 11/19/10

Loc: Victoria, Australia
Re: The future of mounts--any thoughts? new [Re: Chris Lyons]
      #4387543 - 02/15/11 08:37 AM

Built-in guidscopes with both spectroscopic and pattern recognition, linked of course to the mount's PEC software?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ad Astra
professor emeritus
*****

Reged: 05/12/10

Loc: Riverside Co., California
Re: The future of mounts--any thoughts? new [Re: Waxing Gibbous]
      #4388737 - 02/15/11 06:29 PM

I'd love to see a titanium edition of something like the AP-900 mount. That mount disassembles into two hefty pieces, a titanium edition would be very strong, and very light weight as well.

Just a thought!!

Dan


Post Extras: Print Post   Remind Me!   Notify Moderator  
BPO
sage


Reged: 02/23/10

Loc: South Island, NZ
Re: The future of mounts--any thoughts? new [Re: Chris Lyons]
      #4388757 - 02/15/11 06:38 PM

Chris, I've been communicating with a university that operates a few DDM-85 mounts and they were limited to approximately 45 minute unguided exposures due to OTA truss rigidity problems, which they are still attempting to resolve.

However, another user solved his flexure conundrum by replacing all stock bolts and fasteners with much higher quality ones, and is now able to achieve in excess of 90 minute unguided exposures, so it sounds as if you're on the right track with your problem solving quest.

Good luck, you have a heck of a mount there.


Post Extras: Print Post   Remind Me!   Notify Moderator  
avarakin
Carpal Tunnel
*****

Reged: 07/13/09

Loc: Parsippany NJ, USA
Re: The future of mounts--any thoughts? new [Re: BPO]
      #4388993 - 02/15/11 08:42 PM

How about Alt/Az mount with field de-rotator coming as part of the mount and controlled by main computer? I never used field de-rotator, but based on a mental experiment, I think that field de-rotator needs to have variable speed depending on point in the sky it is pointing to. Thus it needs to be controlled by main computer which drives other 2 motors. Once you have 3 axis controlled by a computer, there is no need to polar align such mount.
Advantages of such mount would be:
1. no need to do polar alignment, computer would just move all motors based on result of 2 or 3 star alignment procedure
2. since it is Alt/Az, there is no need for counterweight
3. A separate kit can be manufactured which fits a regular dob

Based on all this, a 24" amateur astrograph becomes a reality!
GEM is dead, long live Dob!

Alex


Post Extras: Print Post   Remind Me!   Notify Moderator  
orlyandico
Post Laureate
*****

Reged: 08/10/09

Loc: Singapore
Re: The future of mounts--any thoughts? new [Re: avarakin]
      #4389130 - 02/15/11 09:51 PM

Meade already had such a field derotator on their larger LX200GPS models almost ten years ago.. it is as you describe, the alt-az computer also drove the motor on the derotator.

The famous Mel Bartels scope.exe DOS-based scope drive also has a provision for driving a field derotator in addition to the alt and az motors.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Astrojensen
Post Laureate
*****

Reged: 10/05/08

Loc: Bornholm, Denmark
Re: The future of mounts--any thoughts? new [Re: avarakin]
      #4389587 - 02/16/11 04:38 AM

This Danish mount is an altaz with a innovative field rotator that rotates the entire telescope instead of just the camera. Has been tested by a Danish imager and the prototype worked almost flawlessly. I've seen it in person, it's rugged and will easily carry a TEC 140. There's also a bigger mount that will carry a much larger scope.

http://shop.trackthestars.com/product.asp?product=4

http://trackthestars.com/astro-photography.html?task=view


Clear skies!
Thomas, Denmark


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jon Isaacs
Postmaster
*****

Reged: 06/16/04

Loc: San Diego and Boulevard, CA
Re: The future of mounts--any thoughts? new [Re: Ad Astra]
      #4389608 - 02/16/11 05:06 AM

Quote:

I'd love to see a titanium edition of something like the AP-900 mount. That mount disassembles into two hefty pieces, a titanium edition would be very strong, and very light weight as well.

Just a thought!!

Dan




Titanium is a good aterial when strength is important but strength is not important in a mount. The difference between strength and stiffness is important, strength is how much force it takes to fail the part, stiffness is how much it moves under a given force. What is important in a telescope mount is stiffness, that is measured by Young's modulus, if you pull on a 10 inch long, 1 square inch area with say 20,000 lbs, how far does it move??

There are three metals that are worth considering, steel, titanium and aluminum. What is interesting about these three materials is they all have essentially the same "specific stiffness", i.e. how much force will it take to deform 1 pound of each material, made into a piece 1 foot long, 0.002 inches? It takes about the same force for all three...

So what it turns out is that for equal weight parts, if one can take advantage of the geometric advantages that increase stiffness, then aluminum is generally the best choice. If one is constrained to specific dimensions, then steel is the better choice.

As an example, if the question is: If I have 2 pounds of material and I want the stiffest tripod leg that is 40 inches long, then aluminum is the material of choice. On the other hand, if I have 2 pounds of material and I want the stiffest tripod leg that is 40 inches long AND 1.75 inches in diameter, then steel is a somewhat better choice.

Jon


Post Extras: Print Post   Remind Me!   Notify Moderator  
alpal
Post Laureate


Reged: 06/15/09

Loc: Melbourne Australia.
Re: The future of mounts--any thoughts? new [Re: Jon Isaacs]
      #4389617 - 02/16/11 05:39 AM

I am hoping the EQ8 will be a good mount.
I might buy one if they are any good.
see youtube video:

http://www.youtube.com/watch?feature=player_embedded&v=Mg6WLerTKZg#at=18


Post Extras: Print Post   Remind Me!   Notify Moderator  
Astrojensen
Post Laureate
*****

Reged: 10/05/08

Loc: Bornholm, Denmark
Re: The future of mounts--any thoughts? new [Re: Jon Isaacs]
      #4389673 - 02/16/11 06:58 AM

Quote:

As an example, if the question is: If I have 2 pounds of material and I want the stiffest tripod leg that is 40 inches long, then aluminum is the material of choice. On the other hand, if I have 2 pounds of material and I want the stiffest tripod leg that is 40 inches long AND 1.75 inches in diameter, then steel is a somewhat better choice.




And if I have to build it myself in my small shop, then wood is the best choice!

Nice little lecture, Jon.


Clear skies!
Thomas, Denmark


Post Extras: Print Post   Remind Me!   Notify Moderator  
rjsc2000
sage


Reged: 09/21/06

Loc: Portugal
Re: The future of mounts--any thoughts? new [Re: Astrojensen]
      #4389759 - 02/16/11 08:18 AM

What about carbon? As seen in telescopes tubes made of it?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Astrojensen
Post Laureate
*****

Reged: 10/05/08

Loc: Bornholm, Denmark
Re: The future of mounts--any thoughts? new [Re: rjsc2000]
      #4389809 - 02/16/11 08:56 AM

Carbon fiber materials can certainly be used for some parts of a mount, but it is not a material for the average ATM, for sure. Carbon dust must be kept far away from any electric tools, for example, or they will short circuit in a few moments after getting the carbon dust inside.

I am not sure if carbon materials can be die cast, like aluminum, so that you could cast axle housings, for example.


Clear skies!
Thomas, Denmark


Post Extras: Print Post   Remind Me!   Notify Moderator  
Peter Glus
sage
*****

Reged: 05/08/06

Re: The future of mounts--any thoughts? new [Re: Astrojensen]
      #4391626 - 02/16/11 10:21 PM

harmonic gears....thats the best invention yet for mounts

Post Extras: Print Post   Remind Me!   Notify Moderator  
orlyandico
Post Laureate
*****

Reged: 08/10/09

Loc: Singapore
Re: The future of mounts--any thoughts? new [Re: Peter Glus]
      #4391670 - 02/16/11 10:49 PM

pity harmonic gearboxes are eye-poppingly expensive (and monopolized by a single manufacturer).

i was thinking of doing some DIY experimentation but even surplus harmonic gearboxes cost an arm and a leg on ebay.


Post Extras: Print Post   Remind Me!   Notify Moderator  
BPO
sage


Reged: 02/23/10

Loc: South Island, NZ
Re: The future of mounts--any thoughts? new [Re: orlyandico]
      #4391835 - 02/17/11 12:53 AM

After comparing current harmonic drive based mounts with the available direct drive models, the decision seemed easy to make.

Post Extras: Print Post   Remind Me!   Notify Moderator  
gdd
scholastic sledgehammer


Reged: 11/23/05

Loc: N Seattle suburb, WA
Re: The future of mounts--any thoughts? new [Re: mistyridge]
      #4392347 - 02/17/11 10:52 AM

Quote:

Will having to do polar alignment be a thing of the past? Will we see portable self aligning harmonic drive mounts




Currently even the self aligning mounts take their best shot at aligning and then rely on autoguiding to compensate for alignment errors. Will the future have continous aligning mounts, where the autoguider feeds senses drift and makes corrections to the polar alignment to reduce further drift? Will it also sense disagreement with the star maps and make on-the-fly modelling corrections?

Gale


Post Extras: Print Post   Remind Me!   Notify Moderator  
Chris Lyons
member


Reged: 12/28/09

Loc: Baltimore
Re: The future of mounts--any thoughts? new [Re: BPO]
      #4393039 - 02/17/11 04:52 PM

Howdy BPO. Yep I know what you
mean about the choice!
Those Chronos mounts just look
awesome and the whole no CW and
no meridian flip thing is a real
selling point but there was no
way I could justify the price at
the time ( or now!! ) plus there
was a good reason to go with the
A.S.A. DDM aside from the direct
drive no PE deal -- the guys at
my company are direct drive and
PID demons so I knew there would
be immediate support!
And the DDM looks very cool ( but
so does the Chronos!! Decisions! )
You know you have the right mount
when all your tracking problems
are solely caused by flexure in
the scope and rings!
With no guide scope and other junk
hanging off it things are simpler
and I get excellent unguided times.
The PE is non existent so that's
good.
The only downsize if you like to
these new top line mounts is the
learning curve can be steep for
people who aren't used to it.
So I guess it comes down to how
seriously you take the hobby.
Chris


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hikari
scholastic sledgehammer
*****

Reged: 01/05/11

Loc: Maine, USA
Re: The future of mounts--any thoughts? new [Re: Chris Lyons]
      #4393262 - 02/17/11 06:47 PM

One day they will make mounts that can do more than just go around in circles.

Post Extras: Print Post   Remind Me!   Notify Moderator  
frolinmod
Carpal Tunnel


Reged: 08/06/10

Loc: Southern California
Re: The future of mounts--any thoughts? new [Re: Astrojensen]
      #4394058 - 02/18/11 01:34 AM Attachment (89 downloads)

Quote:

Not if you want to do long-exposure photography with no field rotation, but I think there's a good chance that mounts will be developed that can do it themselves with very, VERY high accuracy. All it would take was some motors on the altitude and azimuth adjustments on a GEM, a CCD camera and a computer that could talk with the camera, the mount and the adjustment motors and then run an automated drift alignment procedure. Given the sensitivity of the CCD, it could probably be done in a few minutes.



This is already being done now except that one still has to manually turn the altitude and azimuth adjustment knobs on the mount in the direction and by the amount indicated by the software. How would you like four (4) arc-second RMS all sky pointing on your Paramount? It's called T-point. Mind you, it does take more than a few minutes to achieve this. It takes a few hours. But it's practically effortless as T-point and the mount do all the grunt work while you sip your hot chocolate and browse CN.


Edited by frolinmod (02/18/11 01:51 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Starhawk
Space Ranger
*****

Reged: 09/16/08

Loc: Tucson, Arizona
Re: The future of mounts--any thoughts? new [Re: frolinmod]
      #4395091 - 02/18/11 02:36 PM

Oh good, the CN troll didn't overlook the Mounts Forum!

-Rich


Post Extras: Print Post   Remind Me!   Notify Moderator  
JStanley
member


Reged: 03/07/10

Loc: Tacoma, WA
Re: The future of mounts--any thoughts? new [Re: Chris Lyons]
      #4396981 - 02/19/11 12:30 PM

I own a Chronos HD32HPO Mount (250lbs max load) and Iím very happy with it. Itís very precise and I love no meridian flips or counter weights. Chronos now has a native driver for TheSkyX Pro that works very well. It has not crashed once during my detailed testing and provides seamless integration with TheSkyX Pro.

If I remember correctly, the entry level Chronos costs about the same and an entry level Software Bisque Paramount. So if you are considering buying a new High-End Mount you should give serious consideration to getting a Chronos Mount.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Nasus
member


Reged: 11/26/07

Re: The future of mounts--any thoughts? new [Re: JStanley]
      #4397915 - 02/19/11 08:00 PM

a) direct drives (mounts still expensive; ~10k$, but available)
b) integrated USB, wifi, bluetooth (getting rid of those adapters and obsolete parallel ports...plug&play instead of pray)
c) LiPo - way lighter and smaller than those 1900ish bulky leadboxes
d) portable and precise mounts for AP

ps.:
e) gems will still be around - but instead of counterweights we'll use another scope to gather more light.


Post Extras: Print Post   Remind Me!   Notify Moderator  
frolinmod
Carpal Tunnel


Reged: 08/06/10

Loc: Southern California
Re: The future of mounts--any thoughts? new [Re: JStanley]
      #4398154 - 02/19/11 09:58 PM

Quote:

I own a Chronos HD32HPO Mount (250lbs max load) and Iím very happy with it.



I for one would like to know more. If you haven't already, can you write a review?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Chris Lyons
member


Reged: 12/28/09

Loc: Baltimore
Re: The future of mounts--any thoughts? new [Re: frolinmod]
      #6378559 - 02/15/14 09:27 PM

That's a very cool looking machine.
Very industrial.
Chris


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)


Extra information
23 registered and 32 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 3193

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics