Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Reflectors

Pages: 1 | 2 | 3 | (show all)
tag1260
scholastic sledgehammer
*****

Reged: 10/07/12

Loc: Ohio, USA
Secondary spider designs?
      #6088296 - 09/18/13 03:33 PM

Looking for input on spider designs. I'm building a 12" truss dob and am going to order a new spider for it. What are the pros and cons of the different designs. 3 or 4 vein, straight versus curved ?

Help me decide what is optimum.

Thanks
Tag


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pinbout
Postmaster
*****

Reged: 02/22/10

Loc: nj
Re: Secondary spider designs? new [Re: tag1260]
      #6088342 - 09/18/13 04:04 PM

http://www.astrosystems.biz/spiders.htm

$44 for a spider. save a headache, buy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
hbanich
Pooh-Bah
*****

Reged: 06/17/05

Loc: Portland, Oregon
Re: Secondary spider designs? new [Re: Pinbout]
      #6088362 - 09/18/13 04:14 PM

Hi Tag,

A three vane spider will create six diffraction spikes and is slightly more difficult to physically center in your upper tube assembly.

A four vane spider creates four diffraction spikes and is slightly easier to physically center in the uta.

A curved spider doesn't create any diffraction spikes but spreads diffracted light through the field of view and can be a bugger to physically center in the uta.

So it depends on how many, if any, diffraction spikes you prefer and ease of installation. Four vane spiders seem to be the most popular but all three versions are commercially available and not all that difficult to make yourself. I've made all three on different scopes through the years and prefer the four vane spider.


Post Extras: Print Post   Remind Me!   Notify Moderator  
dpwoos
Pooh-Bah
*****

Reged: 10/18/06

Loc: United States
Re: Secondary spider designs? new [Re: hbanich]
      #6089150 - 09/18/13 11:26 PM

I have made several of these:

http://woosfamily.net/dennis/Spider/


Post Extras: Print Post   Remind Me!   Notify Moderator  
MitchAlsup
Pooh-Bah


Reged: 08/31/09

Re: Secondary spider designs? new [Re: dpwoos]
      #6089814 - 09/19/13 12:03 PM

In any event, the thinner the vanes the less light gets diffracted. My 20" DOB gets away with 0.010" thick vanes. I used 4 vanes with a pair meating at 90 degrees on both sides of the secondary fixture. This prevents the fixture from rotating about its center (unlike common 4 vanes at 90 degrees centered on the axis designs).

Post Extras: Print Post   Remind Me!   Notify Moderator  
Starman1
Vendor (EyepiecesEtc.com)
*****

Reged: 06/24/03

Loc: Los Angeles
Re: Secondary spider designs? new [Re: MitchAlsup]
      #6090262 - 09/19/13 04:32 PM

Want curved and thin and relatively stiff?
If your secondary is up to 3", this design should work:
http://www.obsessiontelescopes.com/telescopes/12.5/
go down the page until you see a pic of the spider on the right and click on the pic for a larger image.
If you install a spider like this, keep it vertically symmetrical, i.e. like )( and not tilted.

Edited by Starman1 (09/19/13 04:34 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ed Jones
Carpal Tunnel
*****

Reged: 04/06/04

Loc: Sin-sin-atti
Re: Secondary spider designs? new [Re: tag1260]
      #6090537 - 09/19/13 07:25 PM

Curved spiders are never as rigid as straight vanes and can be a source of vibration or sag unless they are rather thick. With 3 thin vanes you'll only see spikes on the brightest stars, that's my preference.

Post Extras: Print Post   Remind Me!   Notify Moderator  
GeneT
Ely Kid
*****

Reged: 11/07/08

Loc: South Texas
Re: Secondary spider designs? new [Re: tag1260]
      #6090783 - 09/19/13 10:35 PM

A lot of people like the curved secondary holders. Call me old fashioned, but I prefer the four vein spiders. I know how to deal with the various issues they present; not so sure about the three vein or curved.

Post Extras: Print Post   Remind Me!   Notify Moderator  
dpwoos
Pooh-Bah
*****

Reged: 10/18/06

Loc: United States
Re: Secondary spider designs? new [Re: Ed Jones]
      #6090853 - 09/19/13 11:25 PM

Quote:

Curved spiders are never as rigid as straight vanes and can be a source of vibration or sag unless they are rather thick. With 3 thin vanes you'll only see spikes on the brightest stars, that's my preference.




When we first rolled out our homemade 10" f/6 dob, the curved spider was made from a single length of stainless steel ruler - a single curve. It was not good, as the vibration was awful. However, we added a second curve on the other side (like Don discussed above) and now it is rock solid - zero vibration - and it provides excellent performance. Our 5" and 6" dobs use a single curve, but made with wider stainless steel (as seen in my link posted above). They too are rock solid, and are excellent scopes. If I was to do the 10" again, I would try the wide single curve. When done carefully, the extra width is parallel to the incoming light and so adds rigidity without adding thickness.

On the other hand, I am totally in agreement that so far as rigidity and simplicity goes, straight vanes are the way to go. In my case, I was tired of having the spikes interfere with my observing double/multiple stars, and so went down the dark and dangerous curved spider road!


Post Extras: Print Post   Remind Me!   Notify Moderator  
tag1260
scholastic sledgehammer
*****

Reged: 10/07/12

Loc: Ohio, USA
Re: Secondary spider designs? new [Re: dpwoos]
      #6091122 - 09/20/13 05:53 AM

Thanks everyone . I now am more confused on what to get then ever!!!!!

Anyways.....

Don

Where can you find a spider like the one from the Obsession page? Plus, what are the advantages to that design?

Thanks
Tag


Post Extras: Print Post   Remind Me!   Notify Moderator  
jpcannavo
scholastic sledgehammer
*****

Reged: 02/21/05

Loc: Ex NYCer, Now in Denver CO!
Re: Secondary spider designs? new [Re: tag1260]
      #6091202 - 09/20/13 07:54 AM

All the above input is right on. I would only add this: if you don't have particularly strong feelings about the presence of diffraction spikes then go with the most straight forward arrangement: 4 straight veins. You can always experiment with alternatives down the road. also, just to be clear, and all things being equal, 3 vein spiders yield 6 spikes, yet each spike is only half as bright as in a 4 vein [3/4 the amount of total diffraction distributed over 3/2 the number spikes, I.e. 2/3 times 3/4=1/2].

Post Extras: Print Post   Remind Me!   Notify Moderator  
Starman1
Vendor (EyepiecesEtc.com)
*****

Reged: 06/24/03

Loc: Los Angeles
Re: Secondary spider designs? new [Re: tag1260]
      #6091457 - 09/20/13 10:24 AM

Quote:

Thanks everyone . I now am more confused on what to get then ever!!!!!

Anyways.....

Don

Where can you find a spider like the one from the Obsession page? Plus, what are the advantages to that design?

Thanks
Tag



Well, the stiffest and strongest will be the 4-straight-vane variety.
The )( design on the Obsession is probably proprietary. It could be made easily enough by using an Astrosystems secondary holder and finding some sheet stainless steel for the vanes. You'd need a vise to bend the metal at the ends and a drill. The center could be wood or a metal block or whatever is convenient.


Post Extras: Print Post   Remind Me!   Notify Moderator  
hottr6
Carpal Tunnel
*****

Reged: 06/28/09

Loc: 7,500', Magdalena Mtns, NM
Re: Secondary spider designs? new [Re: Starman1]
      #6091560 - 09/20/13 11:33 AM

Quote:


Well, the stiffest and strongest will be the 4-straight-vane variety.



Don,

Are there any studies done on this? Intuitively, I sense that a 3-vane system will be as rigid as a 4-vane given the short beam-lengths we are using. A 3-vane spider accurately defines a plane, but a 4-point spider defines 2 planes, suggesting that a 4-vane spider will have out-of-plane forces acting on the secondary support. An engineer is needed here to describe the forces at work.

I'll also contend that a 3-vane system is much easier to adjust, and achieve equal tension on all vanes. This has implications for people using very-thin walled tubes.

3-vane spiders are likely lighter than a 4-vane.... an important consideration for the ultra-light weight contingent.

For the rest of us, I would say that the choice between a 3- and 4-vane system is a matter of personal preference..... 6 faint diffraction spikes vs 4 relatively bright spikes. I have both in my Newts, but I prefer 3-vane spiders.


Post Extras: Print Post   Remind Me!   Notify Moderator  
garret
sage


Reged: 07/26/09

Loc: Netherlands
Re: Secondary spider designs? new [Re: hottr6]
      #6091599 - 09/20/13 12:00 PM Attachment (15 downloads)

The ASA newtons has double (very thin) vanes:

Post Extras: Print Post   Remind Me!   Notify Moderator  
MitchAlsup
Pooh-Bah


Reged: 08/31/09

Re: Secondary spider designs? new [Re: hottr6]
      #6091696 - 09/20/13 12:41 PM

Quote:

Quote:


Well, the stiffest and strongest will be the 4-straight-vane variety.



Don,

Are there any studies done on this?




Yes, the 4 vane of >-< architecture is the only one that completely eliminates rocking couples of the secondary mirror on the optical axis. Both sides of the secondary holder attach to vanes at 90 degrees so all rocking forces are in pure tension.

Its 3 vane varient >-- has a rocking couple where the other side of the secondary holder attaches to the vane. The rocking couple on this end is in quadradic tension (i.e. not good).

The 4 vane varrient >< has rocking couples because the vanes prevent rotation around the optical axis only in quadradic tension.


Post Extras: Print Post   Remind Me!   Notify Moderator  
vct123
sage
*****

Reged: 11/17/09

Loc: Staten Island, N.Y.
Re: Secondary spider designs? new [Re: MitchAlsup]
      #6091804 - 09/20/13 01:24 PM

If viewing will be mostly deep sky, then go with 4.
If you plan on using the scope for planetary use, then go curved 3 or 4 vanes.


Post Extras: Print Post   Remind Me!   Notify Moderator  
csrlice12
Postmaster
*****

Reged: 05/22/12

Loc: Denver, CO
Re: Secondary spider designs? new [Re: vct123]
      #6091834 - 09/20/13 01:39 PM

I've often wondered, why can't the secondary be built into the focuser....you'd only need one vane and possibly some tilt adjustment screws. The secondary would be permanently aligned with the focuser tube that way except for the tilt....Of course this could be a mess if you ever decide to replace the focuser....

Post Extras: Print Post   Remind Me!   Notify Moderator  
Starman1
Vendor (EyepiecesEtc.com)
*****

Reged: 06/24/03

Loc: Los Angeles
Re: Secondary spider designs? new [Re: hottr6]
      #6091990 - 09/20/13 03:26 PM

Quote:

Quote:


Well, the stiffest and strongest will be the 4-straight-vane variety.



Don,

Are there any studies done on this? Intuitively, I sense that a 3-vane system will be as rigid as a 4-vane given the short beam-lengths we are using. A 3-vane spider accurately defines a plane, but a 4-point spider defines 2 planes, suggesting that a 4-vane spider will have out-of-plane forces acting on the secondary support. An engineer is needed here to describe the forces at work.

I'll also contend that a 3-vane system is much easier to adjust, and achieve equal tension on all vanes. This has implications for people using very-thin walled tubes.

3-vane spiders are likely lighter than a 4-vane.... an important consideration for the ultra-light weight contingent.

For the rest of us, I would say that the choice between a 3- and 4-vane system is a matter of personal preference..... 6 faint diffraction spikes vs 4 relatively bright spikes. I have both in my Newts, but I prefer 3-vane spiders.




In a 4-vane assembly, each vane tension increase also increases the tension of the blade opposite. This actually lessens the necessary forces on the vanes because the forces are directly in line with the vanes. A higher tension down the length of the blade (necessary to hold the vane in place) results from less force applied to the bolts holding the vanes[than with vanes that are not opposite one another].

In a 3-vane assembly, each vane tension increase increases the tension on both of the other blades but not all of the tightening force goes into tightening the other blades because a substantial portion of it is lateral rather than direct in line with the blades.

Since thin flat blades have little resistance to lateral forces, the blades in a 3-vane arrangement have to be thicker than those in a 4-vane arrangement or the entire arrangement has to have a higher tension than a 4-vane arrangement. In other words, because tightening one blade tends to bend the other two vanes laterally as well as applying tension along their lengths, the tension has to be brought up to a higher level in a 3-vane arrangement to hold the center as tightly as in a 4-vane arrangement.
And since holding the center tightly is essential to preserving collimation as the scope moves up and down, the 3-vane arrangement is at a disadvantage.

Also, it seems, from a couple studies, that rigidity of the spider to resisting gravitational forces on the secondary as the scope points lower requires a vertical symmetry in the attachment of the spider. I.e. a 4 vane arrangement has to be attached as either an X or a + while a 3-vane arrangement should be attached as a Y or and upside down Y.

All of this matters little to the users of 8" and smaller scopes or 2" secondaries and smaller. But when the weight of the secondary and holder get higher (2.6" and heavier mirrors), resisting gravitational torque on the vanes with altitude change in the scope matters quite a bit if preserving collimation is desired. This puts curved vanes at a disadvantage as well as the 3-vane configuration.


Post Extras: Print Post   Remind Me!   Notify Moderator  
obin robinson
Carpal Tunnel
*****

Reged: 10/25/12

Loc: League City, TX
Re: Secondary spider designs? new [Re: tag1260]
      #6092232 - 09/20/13 06:00 PM

This discussion has me thinking of if I should use a 4-vane spider in my 4.5" astrograph I am rebuilding. This will be used primarily for imaging satellites especially geostationaries. Should I use my 3-vane spider or have a custom 4-vane one built? The money doesn't matter as I want to make this thing as perfect as possible on my first attempt.

obin


Post Extras: Print Post   Remind Me!   Notify Moderator  
Starman1
Vendor (EyepiecesEtc.com)
*****

Reged: 06/24/03

Loc: Los Angeles
Re: Secondary spider designs? new [Re: obin robinson]
      #6092247 - 09/20/13 06:10 PM

Quote:

This discussion has me thinking of if I should use a 4-vane spider in my 4.5" astrograph I am rebuilding. This will be used primarily for imaging satellites especially geostationaries. Should I use my 3-vane spider or have a custom 4-vane one built? The money doesn't matter as I want to make this thing as perfect as possible on my first attempt.

obin



Well, since your secondary will be small, it matters more how you want the images to come out. With a 4-vane spider, you could have exceptionally thin vanes (0.01" or less) and reduce the diffraction, while getting those lovely crosses on the bright stars (which some refractor users ADD to the images). With 3 vanes, you'll get six spikes on every bright star.

It will matter a lot how long the focal length is and how large a chip you use.
If the scope is f/5 or faster, you will need some form of coma correction--especially on a large chip camera.
If the focal length is shorter than 1000mm, you might need a field flattener if the chip in your camera is a decent size.
Those factors will probably matter more than the number of vanes in your spider.


Post Extras: Print Post   Remind Me!   Notify Moderator  
obin robinson
Carpal Tunnel
*****

Reged: 10/25/12

Loc: League City, TX
Re: Secondary spider designs? new [Re: Starman1]
      #6092431 - 09/20/13 08:20 PM

Don,

The focal length is a f/7.9 and I have tested both my DSLR and CCD camera in the tester configuration. The images look fine. I do notice the multiple diffraction spikes though. I might just consider a thinner 4 vane as long as it will make a positive difference.

obin


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jon Isaacs
Postmaster
*****

Reged: 06/16/04

Loc: San Diego and Boulevard, CA
Re: Secondary spider designs? new [Re: hottr6]
      #6092891 - 09/21/13 06:46 AM

Quote:

Don,

Are there any studies done on this? Intuitively, I sense that a 3-vane system will be as rigid as a 4-vane given the short beam-lengths we are using. A 3-vane spider accurately defines a plane, but a 4-point spider defines 2 planes, suggesting that a 4-vane spider will have out-of-plane forces acting on the secondary support. An engineer is needed here to describe the forces at work.





I am not exactly sure what you are concerned about here. A 4 vane spider has two pairs in direct tension. The pairs are at 90 degrees and have essentially stiffness at 90 degrees so for small deflections, adjusting one pair does not affect the other pair.

As far as easy to adjust, I think 4 are easier to center simply because can be done independently in X and Y. With 3, when you adjust 1 you then have to adjust the other two. They are also easier to tension for the same reason.

I think that scope design issues can guide the number of vanes. In a single upper ring three strut design ala Albert Hinge, three spiders that are aligned with the struts reduces the bending forces on the upper ring.

Diffraction spikes don't bother me, the secondary shifting with altitude bothers me. The job of the spider is to accurately and robustly position the secondary mirror. A 3 or 4 vane straight vane spider is the best way to do this..

In the spoked wheel designs, one never sees a bicycle wheel with curved spokes unless they are very wide and made of composite.. there is a lesson there.

Jon


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarkikos
Postmaster
*****

Reged: 12/18/07

Loc: Nyctophobia, Maryland, USA
Re: Secondary spider designs? new [Re: vct123]
      #6094980 - 09/22/13 12:23 PM

Quote:

If viewing will be mostly deep sky, then go with 4.
If you plan on using the scope for planetary use, then go curved 3 or 4 vanes.




Why? Is it really better to spread the diffraction across the image rather than have it concentrated in four spikes? I don't think so. Also, four vanes tend to have better stability and hold collimation better than curved. Close, stable collimation is important for planet viewing.

I think the only advantage to curved vanes is for double stars and for observers who have a personal aesthetic preference for no spikes in the image.

Mike


Post Extras: Print Post   Remind Me!   Notify Moderator  
dpwoos
Pooh-Bah
*****

Reged: 10/18/06

Loc: United States
Re: Secondary spider designs? new [Re: Sarkikos]
      #6095109 - 09/22/13 01:52 PM

My (homemade) curved spiders don't exhibit any collimation issues. Maybe for really large/heavy secondaries it is an issue, but then I would expect a good design to account for this.

To me, the issue boils down to diffraction, and how one sees the trade-offs. I think the facts are well known, and what is left is all subjective. Really, not such a big deal and if the views are great I don't care that much whether I see diffraction spikes or not, nor how many.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jon Isaacs
Postmaster
*****

Reged: 06/16/04

Loc: San Diego and Boulevard, CA
Re: Secondary spider designs? new [Re: dpwoos]
      #6095206 - 09/22/13 03:07 PM

Quote:

My (homemade) curved spiders don't exhibit any collimation issues. Maybe for really large/heavy secondaries it is an issue, but then I would expect a good design to account for this.





As a mechanical engineer, I agree. Good mechanical design for a spider is simple, straight vanes, pure tension, no bending. Look at a spoked bicycle wheel...

If minimizing diffraction is a concern, thinner vanes are better and straight vanes, because they are in tension and not out of plane bending, can be thinner.

Jon


Post Extras: Print Post   Remind Me!   Notify Moderator  
careysub
Carpal Tunnel
*****

Reged: 02/18/11

Loc: Rancho Cucamonga, CA
Re: Secondary spider designs? new [Re: Sarkikos]
      #6096227 - 09/23/13 03:19 AM

Quote:

Quote:

If viewing will be mostly deep sky, then go with 4.
If you plan on using the scope for planetary use, then go curved 3 or 4 vanes.




Why? Is it really better to spread the diffraction across the image rather than have it concentrated in four spikes? I don't think so.
...




If we are talking about visual use then the sensitivity of the human eye to small contrast reductions across an entire image is crucial.

It seems commonly accepted, for example, that illumination drops of 40% at the edge of field are acceptable since human vision is not very sensitive to reductions of this magnitude. (In fact it is often held that trying 100% illumination across the field is bad design, forcing compromises in other areas in return for an insignificant visual effect.)

Remember that the area of the vanes is small compared to that of the secondary, which is already causing contrast loss across the image.

Can the human eye actually detect the difference between, say, a 20% CO with no spider and a 20% CO + 2% spider vane? Is there evidence that it can?

Asserting that it can seems to conflict with statements in Suiter, and also seems unlikely simply due to the human eye usually being insensitive so small incremental changes of this kind. It is commonly held here that CO obstruction equal to or less than 25% causes minimal degradation. This seem inconsistent with the idea that a 20% CO + 2% spider would cause objectionable effects.

One poster here did an experiment a few years ago with different vane designs (mocked up with masks) and found even very thick curved vanes to be undetectable.

Suiter's analyses show very small contrast reductions from spider vanes.

It would seem that the only reason we would be aware of it at all visually is if, by chance, the entire effect where concentrated in a few small areas of the image and in such a way as to activate the eye in a way it is particularly sensitive to.

And that is what straight vanes do. The diffraction energy shows up in a few tin areas of the image, usually in a high contrast way (black background), and in a straight line for which the eye is a very sensitive detector.

Three and four vane spiders concentrate diffraction and thus render it quite visible, and a potential interfering artifact. It does not follow that spreading it over an image in a way that they eye cannot detect it is as bad or worse.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jon Isaacs
Postmaster
*****

Reged: 06/16/04

Loc: San Diego and Boulevard, CA
Re: Secondary spider designs? new [Re: careysub]
      #6096322 - 09/23/13 07:42 AM

Quote:

Three and four vane spiders concentrate diffraction and thus render it quite visible, and a potential interfering artifact. It does not follow that spreading it over an image in a way that they eye cannot detect it is as bad or worse.




The eye cannot detect because it is spread out much the way you cannot see the California Nebula in a long focal length scope, it fills the field of view so there is no gradient in the contrast. But the fact that it cannot be identified does not mean it does not affect the contrast. Viewing a planet like Jupiter, the diffraction from the vanes is apparent, spread out or concentrated, it does affect the contrast..

In any event, the job of the spider is to support the secondary in a robust manner. Curved spiders are not as robust as a straight vane spider. In my mind, a spider that shifts as the scope moves around the sky is the concern and that has the potential to cause damage to the image quality.

Jon


Post Extras: Print Post   Remind Me!   Notify Moderator  
dpwoos
Pooh-Bah
*****

Reged: 10/18/06

Loc: United States
Re: Secondary spider designs? new [Re: careysub]
      #6096428 - 09/23/13 09:06 AM

Quote:

Three and four vane spiders concentrate diffraction and thus render it quite visible, and a potential interfering artifact. It does not follow that spreading it over an image in a way that they eye cannot detect it is as bad or worse.




Interesting, and contrary to what I had always assumed. I have to say that I have never noticed any image degradation attributable to spider diffraction, so what you write is consistent with my experience. For sure there are mechanical challenges, but they are easily overcome. My 6" never had any issues, and my 10" vibration problem was easily corrected by adding a second curved vane. Both scopes are top-notch performers, and exhibit zero collimation issues.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Starman1
Vendor (EyepiecesEtc.com)
*****

Reged: 06/24/03

Loc: Los Angeles
Re: Secondary spider designs? new [Re: dpwoos]
      #6096895 - 09/23/13 02:00 PM

What percentage of surface is actually covered by thin straight vanes?

Take my 12.5" as an example.
The secondary holder is 2.7" across, per my calipers (2.6" secondary contained therein). That means each of the 0.01" vanes covers an area
(6.25-1.35) x 0.01" in area = 0.049sq.in.
Since there are 4 vanes, that's 0.049X4=0.196sq.in.
The area of a 12.5" mirror is 122.718sq.in.
That means the vanes cover 0.196/122.718=0.16% of the mirror.
Since the secondary covers 4.666% of the primary mirror, the increase is 0.16/4.666=0.03% increase.
Were it not for the linear nature of the diffraction, a 0.03% increase in diffraction would be invisible and might be below the increase in diffraction caused by dust on the mirror if the mirror hasn't been cleaned in a while.

Since each point in an extended image is also damaged by this increase in diffraction, and since bright stars (but not faint stars) display the diffraction spikes, is the degradation of the planetary images affected by this increase in diffraction?

Well, certainly mathematically the effect is insignificant. And, so far as I can tell, the effect is also visually insignificant. Very faint moons are still visible near the planet and planets and lunar details are incredibly sharp in good seeing.

One oddity: the field of view of my telescope is larger than the field of view of my eyepieces. Hence, a very bright star can be outside the eyepiece's field of view, yet still in the field of view of the telescope. I have seen, on nights of extreme clarity and darkness of skies, diffraction spikes extending out from some really bright stars (Sirius comes to mind) as much as a degree and a half away from the star (well more than an extra field of the eyepiece), complete with the wave-like variations in brightness along the lengths of the spike (many dips in brightness, actually) and the chromatic issues present in spikes. As soon as the star passes out of the field of view of the scope, the spikes disappear instantly.

Seeing this, I can totally understand why someone would prefer curved spider vanes. Alas, most such vanes have revealed collimation issues to me in the scopes in which I've looked for collimation changes with altitude. There is probably a size-related issue with curved vanes and weight. Where the cutoff should be, I am not certain, though it would seem, from their lightness of weight, that secondaries under 2" shouldn't suffer much, if anything, in the way of miscollimation with altitude due to flexure in the vanes. As I've posted before, the ")(" arrangement of curved vanes seemed plenty stiff up to 2.1" of secondary, though I don't know about heavier. They would seem to be more immune than some to the flexure that occurs as the scope points low.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jeff Morgan
Postmaster
*****

Reged: 09/28/03

Loc: Prescott, AZ
Re: Secondary spider designs? new [Re: Jon Isaacs]
      #6097060 - 09/23/13 04:08 PM

Quote:


In any event, the job of the spider is to support the secondary in a robust manner. Curved spiders are not as robust as a straight vane spider.




I would tend to agree. In search of a "silver bullet" don't lose sight of the basics. Curved spiders are best kept to smaller Newtonians and low mass secondary mirrors.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Kevdog
Pooh-Bah
*****

Reged: 07/11/12

Loc: Desert Hills, AZ
Re: Secondary spider designs? new [Re: tag1260]
      #6097159 - 09/23/13 05:07 PM

Quote:

Looking for input on spider designs. I'm building a 12" truss dob and am going to order a new spider for it. What are the pros and cons of the different designs. 3 or 4 vein, straight versus curved ?

Help me decide what is optimum.

Thanks
Tag




My spiders have 8, I thought they all did!



Of course this one is rather big (4" x 2.5" or so) and you don't want it anywhere near your scope!


Post Extras: Print Post   Remind Me!   Notify Moderator  
careysub
Carpal Tunnel
*****

Reged: 02/18/11

Loc: Rancho Cucamonga, CA
Re: Secondary spider designs? new [Re: Starman1]
      #6105794 - 09/28/13 11:53 AM

Quote:

What percentage of surface is actually covered by thin straight vanes?

Take my 12.5" as an example.
The secondary holder is 2.7" across, per my calipers (2.6" secondary contained therein). That means each of the 0.01" vanes covers an area
(6.25-1.35) x 0.01" in area = 0.049sq.in.
Since there are 4 vanes, that's 0.049X4=0.196sq.in.
The area of a 12.5" mirror is 122.718sq.in.
That means the vanes cover 0.196/122.718=0.16% of the mirror.
Since the secondary covers 4.666% of the primary mirror, the increase is 0.16/4.666=0.03% increase.




That should be:
0.16/4.666=0.034 which is a 3.4% increase.

Another way of looking at it: you are going from a 21.6% obstruction to a 22% obstruction. Put this way some one would be hard pressed to make a (supportable) case that this is significant.


Post Extras: Print Post   Remind Me!   Notify Moderator  
careysub
Carpal Tunnel
*****

Reged: 02/18/11

Loc: Rancho Cucamonga, CA
Re: Secondary spider designs? new [Re: Jon Isaacs]
      #6105801 - 09/28/13 11:59 AM

Let us leave aside the separate question of mechanical stability (it is an unrelated issue and as Jeff Morgan indicates, it not a problem for sufficiently small scopes) and focus on the claim that curved spiders are harming contrast in a way that matters to the human eye.

There is no question the additional diffraction affects the contrast at some level, that is simple physics. The question is whether it is a significant effect.

Using Don's example, do you believe that a going from 21.7% obstruction (secondary only) to a 22% obstruction is a meaningful loss of contrast? Contrast loss is the same.

If the tiny additional diffraction from spider vanes is a matter of concern then the size of the secondary should be a matter of much greater concern. It seems generally agreed that below 25% CO it is really not an issue. Why does it become an issue when the cause are the vanes and not the secondary itself?

Logically one should object even more strongly to edge supporting secondary holders since they slightly increase the diameter of the CO, again using Don's example his holder increases the diameter from 2.6" to 2.7", this is a 7.8% area increase, more than twice the area of his vanes.


Post Extras: Print Post   Remind Me!   Notify Moderator  
BillP
Postmaster
*****

Reged: 11/26/06

Loc: Vienna, VA
Re: Secondary spider designs? new [Re: careysub]
      #6106002 - 09/28/13 01:46 PM

Quote:

There is no question the additional diffraction affects the contrast at some level, that is simple physics. The question is whether it is a significant effect.




Yes. That is indeed the question. However, it is likely that there are no controlled scientific studies to suggest that the small contrast loss IS generally noticeable by the human eye. Conversely, there it is likely that there are no controlled scientific studies to suggest that the small contrast loss IS NOT generally noticeable by the human eye. So any conjecture either way is, and will remain, anecdotal. That being the case, some folks like to err on the side of being conservative, or they simply want to seek perfection making their instrument the best it can possibly be engineered. Nothing wrong at all with the pursuit of perfection. In fact it is admirable! I think this is the case we have here. I doubt the OP is looking for definitive scientific proof that the eye can or cannot see a contrast difference of a few percent. Instead what is important is probably to simply build to the best level technically achievable with his equipment. When one does this, it often brings all the more enjoyment to using the equipment and to the observing session. Just some thoughts on possibilities of the OPs motivations and what is important here.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Starman1
Vendor (EyepiecesEtc.com)
*****

Reged: 06/24/03

Loc: Los Angeles
Re: Secondary spider designs? new [Re: careysub]
      #6106066 - 09/28/13 02:21 PM

Quote:

Quote:

What percentage of surface is actually covered by thin straight vanes?

Take my 12.5" as an example.
The secondary holder is 2.7" across, per my calipers (2.6" secondary contained therein). That means each of the 0.01" vanes covers an area
(6.25-1.35) x 0.01" in area = 0.049sq.in.
Since there are 4 vanes, that's 0.049X4=0.196sq.in.
The area of a 12.5" mirror is 122.718sq.in.
That means the vanes cover 0.196/122.718=0.16% of the mirror.
Since the secondary covers 4.666% of the primary mirror, the increase is 0.16/4.666=0.03% increase.




That should be:
0.16/4.666=0.034 which is a 3.4% increase.

Another way of looking at it: you are going from a 21.6% obstruction to a 22% obstruction. Put this way some one would be hard pressed to make a (supportable) case that this is significant.



Doh! You're right.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Starman1
Vendor (EyepiecesEtc.com)
*****

Reged: 06/24/03

Loc: Los Angeles
Re: Secondary spider designs? new [Re: careysub]
      #6106088 - 09/28/13 02:37 PM

Quote:

Let us leave aside the separate question of mechanical stability (it is an unrelated issue and as Jeff Morgan indicates, it not a problem for sufficiently small scopes) and focus on the claim that curved spiders are harming contrast in a way that matters to the human eye.

There is no question the additional diffraction affects the contrast at some level, that is simple physics. The question is whether it is a significant effect.

Using Don's example, do you believe that a going from 21.7% obstruction (secondary only) to a 22% obstruction is a meaningful loss of contrast? Contrast loss is the same.

If the tiny additional diffraction from spider vanes is a matter of concern then the size of the secondary should be a matter of much greater concern. It seems generally agreed that below 25% CO it is really not an issue. Why does it become an issue when the cause are the vanes and not the secondary itself?

Logically one should object even more strongly to edge supporting secondary holders since they slightly increase the diameter of the CO, again using Don's example his holder increases the diameter from 2.6" to 2.7", this is a 7.8% area increase, more than twice the area of his vanes.



That assumes you can make a sufficiently rigid curved spider with vanes only 0.01" thick. In my experience, curved vanes are often up to 0.1" thick and even more. So the coverage percentage is larger.
With equal thickness of vanes, though, your point is quite valid, and curved vanes would be just fine.

As a side note, it's even worse for my secondary mirror holder, as the Astrosystems secondary holder has a lip about 0.1" thick that surrounds the secondary, blocking some of its reflecting surface. I measure approximately 2.4" of exposed surface on the 2.6" mirror, which sits in a holder 2.7" across. So the 2.4" mirror actually covers 2.7" of the primary.
If I glued the mirror to a stalk, the obstruction would drop from 21.6% to 20.8%, and increase my edge-of-field illumination. Well, my current low power eyepiece has its edge illuminated to 75%, so improving that really isn't necessary.
Is it worth it? Only as an intellectual exercise.

I would like to experiment with the )(-shaped spider like on the 12.5" Obsession. It's been rigid enough on the scopes I've seen with that design (some 8" and 10" scopes), and it seems fairly rigid when tightening collimation screws (perhaps a little better than the 4 straight vanes I'm used to). If anyone out there has a 12.5" Obsession, I'd like to know the thickness of the vanes.


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlBoning
professor emeritus


Reged: 03/06/11

Re: Secondary spider designs? new [Re: Starman1]
      #6106465 - 09/28/13 07:03 PM

Amateur Telescope Optics has equations for calculating the effect on the Strehl Ratio by the vanes and by the central obstruction.

A year or so ago, I was contemplating replacing the spider of an AD8 and also down-sizing the secondary mirror. Lacking both experience and the opportunity to see what effect such changes would have I resorted to doing the calculations using the equations I mentioned above to assist me in coming to a decision. In each case the gain to be had in the Strehl Ratio was 0.02 (or rather the degradation in the Strehl Ratio by the vanes and the secondary obstruction would be each reduced by 0.02). An overall gain of 0.04 may well be regarded as not significant, but OTOH it can be regarded as cost effective.

Consider that in my case, assuming the manufacturer's claim that the primary has a wavefront error of 1/16th wave RMS is correct, the Strehl Ratio of the primary is 0.85 (another equation found at Amateur Telescope Optics). To get a 0.10 improvement in the primary mirror by replacing the primary with premium optics would run from 750 to over a grand depending on where it came from. An alternative would be to have the mirror refigured. Assuming the mirror wouldn't need to be reground then refiguring and coating would run 300+. Now compare this to replacing the spider and downsizing the secondary for a gain of 0.04 costing 300. Which in my mind is reasonable since the MoonLite I put on the scope ran 265. To bring the point home take a look at the cost per 0.01 improvement in the Strehl Ratio. For purchasing a premium mirror it is 75-100, for replacing the spider and downsizing the secondary it is 75.

As it turns out I've reached, what is for me, the point of diminishing returns. That scope is heavily modified already, the only things left to do that would improve it are thin the vanes, and replace the mirrors, but I think I'm going to be quite happy enough leaving it as it is now without spending another dime on it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jeff Morgan
Postmaster
*****

Reged: 09/28/03

Loc: Prescott, AZ
Re: Secondary spider designs? new [Re: Starman1]
      #6106678 - 09/28/13 10:28 PM

Maybe Ed Turco has the right solution ... the optical window.

Well, for the 8" and under crowd anyway.


Post Extras: Print Post   Remind Me!   Notify Moderator  
izar187
Carpal Tunnel


Reged: 09/02/06

Loc: 43N
Re: Secondary spider designs? new [Re: Jeff Morgan]
      #6106947 - 09/29/13 04:39 AM

Except that even at 8" and under, you need to deal with dew and thermal bottling up of the ota.
For both of which there certainly are countermeasures.
But complexity has increased by two factors not present in an open tube, spidered ota.


Post Extras: Print Post   Remind Me!   Notify Moderator  
careysub
Carpal Tunnel
*****

Reged: 02/18/11

Loc: Rancho Cucamonga, CA
Re: Secondary spider designs? new [Re: AlBoning]
      #6107662 - 09/29/13 02:45 PM

Quote:

Amateur Telescope Optics has equations for calculating the effect on the Strehl Ratio by the vanes and by the central obstruction.

A year or so ago, I was contemplating replacing the spider of an AD8 and also down-sizing the secondary mirror. Lacking both experience and the opportunity to see what effect such changes would have I resorted to doing the calculations using the equations I mentioned above to assist me in coming to a decision. In each case the gain to be had in the Strehl Ratio was 0.02 (or rather the degradation in the Strehl Ratio by the vanes and the secondary obstruction would be each reduced by 0.02). An overall gain of 0.04 may well be regarded as not significant, but OTOH it can be regarded as cost effective.
...





I had prepared a post using this equation, but you beat me to it. For those interested it is Eq. 64 (after suitable algebraic reformulation) on this page:
http://www.telescope-optics.net/telescope_central_obstruction.htm

Al does a great job of showing the trade-off considerations on this.


Post Extras: Print Post   Remind Me!   Notify Moderator  
careysub
Carpal Tunnel
*****

Reged: 02/18/11

Loc: Rancho Cucamonga, CA
Re: Secondary spider designs? new [Re: Starman1]
      #6107696 - 09/29/13 03:02 PM

Quote:

...
I would like to experiment with the )(-shaped spider like on the 12.5" Obsession. It's been rigid enough on the scopes I've seen with that design (some 8" and 10" scopes), and it seems fairly rigid when tightening collimation screws (perhaps a little better than the 4 straight vanes I'm used to). If anyone out there has a 12.5" Obsession, I'd like to know the thickness of the vanes.




I wonder if spiders that look like this OO (two complete rings) would work using spring steel strips. They would be under tension, and (I think) resistant to vane twisting*. Would the tension make the hoops stiffer?

*A limiting factor in using wide, thin vanes is that unless the vanes are perfectly parallel and perfectly aligned with the optical axis the profile is likely to be much larger than the vane thickness. A 1" wide, 0.01" thick vane will have its profile doubled by a tilt to the optical axis of just 0.57 degrees.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarkikos
Postmaster
*****

Reged: 12/18/07

Loc: Nyctophobia, Maryland, USA
Re: Secondary spider designs? new [Re: careysub]
      #6108115 - 09/29/13 08:06 PM

The Edmund Astroscan and Bushnell Voyager, both 4.5" reflector ball scopes, have an optical window instead of spider vanes.

Mike


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | 3 | (show all)


Extra information
18 registered and 23 anonymous users are browsing this forum.

Moderator:  ausastronomer, Knuklhdastrnmr, Phillip Creed, JayinUT 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 1780

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics