Return to the Cloudy Nights Telescope Reviews home page

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User

Equipment Discussions >> ATM, Optics and DIY Forum

Pages: 1
Chriske
Kijkerbouw Urania
*****

Reged: 08/15/04
Posts: 1952
Loc: Boechout, Belgium
DIY Mount - Pipe mount (Alt-Az)
      #2561118 - 08/05/08 05:16 AM

To build this one you need exactly the samen plumbing parts as the equatorial pipe mount. Except for the angeled part, here you need a simple T-coupling.
Here again the two motions both altitude and azimuth are done by rotating the pipes on its threads.

Small disadvantage of this short mount is you need extra weights in the OTA to get this one in balance. To overcome this problem you could use a truss instead of a full tube. A truss will lower the COG of the scope.

The same short version could be used in the equatorial version of course.

Usage :
1- Small to large telescopes.
2- Reflector (mostly Newtontelescopes).
3- Very transportable mount..







Large image




Large image




Large image

--------------------
Chris



Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
7 registered and 7 anonymous users are browsing this forum.

Moderator:  Don W, Joe Cipriano 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 293

Jump to

Home



Cloudy Nights Sponsor: Astronomics