Return to the Cloudy Nights Telescope Reviews home page

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User

Equipment Discussions >> Mounts

Pages: 1
omgitsaliv55
journeyman


Reged: 07/27/08
Posts: 7
CG-5 firmware erased new
      #2556914 - 08/02/08 11:10 PM

Hi everyone. I have a cg-5 mount and a nexstar hand control. I recently upgraded my hand control to version 4.13, which allows you to upgrade the motor control firmware via the hand control. I was upgrading the motor control when my computer suddenly turned off. The motor control is corrupt and when I turn on the hand control it says "initializing..." and then goes blank. I can't connect to the hand control through mcupdate in order to reset the motor firmware. I'm in the middle of the star party and I need this to work. Please help! Thanks!

Post Extras: Print Post   Remind Me!   Notify Moderator  
EWhytsell
super member


Reged: 06/15/08
Posts: 165
Loc: North Central Ohio
Re: CG-5 firmware erased new [Re: omgitsaliv55]
      #2558527 - 08/03/08 10:55 PM

Did you get it resolved yet? You say you can't connect via MCupdate, can you connect to it via HCupdate? If so just reinstall the hand control firmware. If not then you'd likely have to sent it back to celestron unless they have a series of keys you can hold down to perform a factory hard reset.

Evan

--------------------
Classic C8 Super Polaris upgraded to CG-5 mount
Canon 40D unmodded


Post Extras: Print Post   Remind Me!   Notify Moderator  
BCB
Post Laureate
*****

Reged: 11/24/03
Posts: 3830
Loc: Look over your shoulder
Re: CG-5 firmware erased new [Re: EWhytsell]
      #2559857 - 08/04/08 04:17 PM

There may be a way to get into programming mode on power up with a series of buttons held down during power up.. It's the only possible way, short of opening it up, and doing it the hard way.

--------------------
Mark

Making people sorry they asked since 1967

Astro-Tech 102ED
Orion 8" F5 Newt w/Moonlight CR-2 focuser
SVP mount w/Meade 497 Autostar GOTO mod
Treeline Observatory



Post Extras: Print Post   Remind Me!   Notify Moderator  
Miguel Lopes
sage


Reged: 01/04/07
Posts: 481
Loc: Portugal
Re: CG-5 firmware erased [Re: omgitsaliv55]
      #2561362 - 08/05/08 09:40 AM

Quote:

Hi everyone. I have a cg-5 mount and a nexstar hand control. I recently upgraded my hand control to version 4.13, which allows you to upgrade the motor control firmware via the hand control.




Where did you find that update? It is not on Celestron's site...

--------------------
Astrology is the science for ignorants. Astronomy is the science for those who feel ignorant. - Miguel Lopes


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
14 registered and 14 anonymous users are browsing this forum.

Moderator:  Charlie Hein, FAB 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 179

Jump to

Home



Cloudy Nights Sponsor: Astronomics