I'm about to start refiguring a secondary in an undercorrected 10" LX-5 for a customer. I've got the secondary itself out but I can't figure out how to remove the secondary baffle assembly from the corrector plate. The reason for this is to be able to autocollimate the whole system by repeatedly replacing the secondary into position on an adjustable holder. If anyone has done this give me a clue.
It will unscrew into 2 pieces. Grab the outer part, and the inner baffle, and twist. Be careful since it is plastic. Just hope someone didn't decide to glue it..
Jeff
-------------------- 18" F/5 Home-Built Dob. with Mike Dudley Mirror
Highly Modified Meade DS-16 in Roll Off Roof
6" F/15 Brass w/ D&G Lens on DS-16 Mount
DS-10 10" F/4.5 Newtonian
LXD650, LX200 Classic
Orange Tube C11
DayStar 0.45 with multiple ERFs
Vixen ED80sf
11x80 Meade, 20x80 Celestron binocs (Japan Made).
Lots of Naglers and 8mm and 13mm Ethos.
Gadgets and parts everywhere.
And a Wife that loves it as much as me!