Return to the Cloudy Nights Telescope Reviews home page

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User

Equipment Discussions >> Mounts

Pages: 1
David Pavlich
Postmaster
*****

Reged: 05/18/05
Posts: 6504
Loc: Mandeville, LA USA 30.38 X 90....
Starfish guider won't connect to PhD
      #2574685 - 08/11/08 03:58 PM

I downloaded the drivers for the Starfish and installed them. I then tried to connect to PhD Guide and Nebulosity with the Starfish. It gives the message: Problem connecting to camera.

I tried all of the settings; ASCOM, On Camera, GPUSB, etc with no luck.

I loaded the drivers on 2 different USB ports. No change.

The operating system is 32 bit Vista. Bob at Fishcamp said that the driver is compatible with the 32 bit system.

So...what am I doing wrong? The Orion guider I had hooked right up. Do I need the GPUSB?

Edit: I tried it in MaximDL. I have no experience with DL but I believe it hooked up under the "Guider" tab. It showed that the cooler wasn't available which it true because this is a non-cooler version.

Thanks! David

--------------------
A few scopes and mounts.
Proud Member; PAS NOLA,

Life expectancies would go WAY up if green vegetables smelled like bacon...




Edited by David Pavlich (08/11/08 05:16 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
robjohn
member


Reged: 06/04/08
Posts: 98
Loc: West Hills, CA
Re: Starfish guider won't connect to PhD new [Re: David Pavlich]
      #2577885 - 08/12/08 10:44 PM

With my Starfish, I have to make sure that I do not have the guider attached to a USB port of the computer when I start the computer up. The guider disables whatever USB port is connected to it when the computer starts up. If I plug the guider into the USB after I have started the computer, everything is fine.

I have a beta version of the Starfish, so this might have been fixed in the production models. Bob was going to look into it, but I have not heard from him in a while, so I don't know the status of this problem.

--------------------
Rob Johnson

Celestron 14" SCT | 8" SCT | 102mm f/5 | Ultima 8x56
ZenithStar 105mm f/7 | 80mm f/6
Vixen ARK 16x80
CGE | CG-5
Canon 50DH
Starfish autoguider





Post Extras: Print Post   Remind Me!   Notify Moderator  
David Pavlich
Postmaster
*****

Reged: 05/18/05
Posts: 6504
Loc: Mandeville, LA USA 30.38 X 90....
Re: Starfish guider won't connect to PhD new [Re: robjohn]
      #2577955 - 08/12/08 11:10 PM

Thanks, Rob. However, the computer was booted before plugging in the guider. I just downloaded Craig's latest version of PhD. I'll give it a try when I get a chance. Maybe that'll be the cure.

David

--------------------
A few scopes and mounts.
Proud Member; PAS NOLA,

Life expectancies would go WAY up if green vegetables smelled like bacon...




Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
10 registered and 9 anonymous users are browsing this forum.

Moderator:  Charlie Hein, FAB 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 117

Jump to

Home



Cloudy Nights Sponsor: Astronomics