Quote:

---

I'm not sure if the issue is really the handbox of the processor in the scope. I would connect the system to the PC and load the autostar firmware update program and execute the garbage collection routine.

---

Hi Marcus....I don't have a computer right now...it died. I'm in the process of buying a new laptop. I have another thread on that purchase.

I already have the new autostar firmware with my scope. It's less than three years old and has version 4.2g. I don't know if that's what you mean?
Thanks for you assistance as usual.

Cheers.

--------------------
Meade 10"LX200R w UHTC "Ocean Liner Anne" + wireless Autostar II
DSI Pro w CCD Color Filter Set
Celestron NexStar 102 SLT "SteamShip Anne"
Celestron SkyMaster 15X70 Binoculars "Can-U Anne"
*New* Canon EOS Rebel XSi/450D DSLR Camera Now Moded


Edited by AstroTay (09/16/08 08:49 AM)

Post Extras:

Quote:

---

First cold night in a while?

---

Hi Joe. Nope...just wind breaker kinda viewing. I'd say about 13 deg cel. Not cold. I remember I was observing in socks and slippers.

--------------------
Meade 10"LX200R w UHTC "Ocean Liner Anne" + wireless Autostar II
DSI Pro w CCD Color Filter Set
Celestron NexStar 102 SLT "SteamShip Anne"
Celestron SkyMaster 15X70 Binoculars "Can-U Anne"
*New* Canon EOS Rebel XSi/450D DSLR Camera Now Moded

Post Extras:

Quote:

---

I'm not sure about the first or third pictures you posted, but the second is quite normal, I think.

---

Hey...how did you brighten up the reading
It was right after the 10'....the minute symbol started to show @#m7 etc in sequence. I pressed MODE which took me out to the SYSTEM: screen eg:-
SYSTEM:
JUPITER @#*m7p!~ etc started to appear.

I'm stumped as to what is causing this.

--------------------
Meade 10"LX200R w UHTC "Ocean Liner Anne" + wireless Autostar II
DSI Pro w CCD Color Filter Set
Celestron NexStar 102 SLT "SteamShip Anne"
Celestron SkyMaster 15X70 Binoculars "Can-U Anne"
*New* Canon EOS Rebel XSi/450D DSLR Camera Now Moded


Edited by AstroTay (09/16/08 09:25 AM)

Post Extras:

Quote:

---

Quote:

---

....I would connect the system to the PC and load the autostar firmware update program and execute the garbage collection routine.

---

..... I already have the new autostar firmware with my scope. It's less than three years old and has version 4.2g. I don't know if that's what you mean?

---

Garbage collection is different than reloading fireware. The Garbage Collection routine get rid of bits of code and data in your handbox, which isn't needed anymore.

--------------------
-Marcus

The problem with free speech is even the stupid have a voice.

http://jatobservatory.org


12" LX200R on a Paramount ME

Post Extras:

Quote:

---

Garbage collection is different that loading fireware. The Garbage Collection routine get rid of bits of code and data in your handbox, which isn't needed anymore.

---

Thanks Marcus. Didn't know that. I'll have to wait until I get a new laptop. That seems to be harder than I anticipated. Every computer is bundled with Windows Vista 64 bit.....and this seems to be a no-no with most software that runs on 32-bit technology.

I was hoping that the HBx problem was more simple. I'll try my local scope store and see if they have a used HBx that I can try to help solve this by weekend.

Thanks.

--------------------
Meade 10"LX200R w UHTC "Ocean Liner Anne" + wireless Autostar II
DSI Pro w CCD Color Filter Set
Celestron NexStar 102 SLT "SteamShip Anne"
Celestron SkyMaster 15X70 Binoculars "Can-U Anne"
*New* Canon EOS Rebel XSi/450D DSLR Camera Now Moded

Post Extras:

Quote:

---

Well you already did a RESET -- so try this reverse the cable to the hand controller-- if it does it again see what happens if you "jiggle" the cable-- my guess is you have a bad hand controller. But you should try reloading the latest firmware 43Eg-- and then see what happens.

---

Hi Joe......the LX200R HBx runs on AutoStar II using version 4.2g. I bought the scope brand new with 4.2g installed.
I believe 43g you are referring to is for the LX90 (?) not sure.

Cheers.

--------------------
Meade 10"LX200R w UHTC "Ocean Liner Anne" + wireless Autostar II
DSI Pro w CCD Color Filter Set
Celestron NexStar 102 SLT "SteamShip Anne"
Celestron SkyMaster 15X70 Binoculars "Can-U Anne"
*New* Canon EOS Rebel XSi/450D DSLR Camera Now Moded

Post Extras:

Quote:

---

It looks to me as if the firmware has been corrupted. Most likely due to power failure(s). If reloading the software doesn't fix it you could try a safe load. Instructions http://tech.groups.yahoo.com/group/lx90/message/41697

Most likely culprit for power losses is the HBX cable. Best fixed by recrimping the rj45 plugs and adding strain relief boots. The pinouts are here Jans lx90 pinouts

---

While it may be a firmware issue and the handbox should not be disconnected or connected with the power on, the firmware for the LX200GPS, R and ACF is contained in the base of the scope not the handbox.

--------------------
-Marcus

The problem with free speech is even the stupid have a voice.

http://jatobservatory.org


12" LX200R on a Paramount ME

Post Extras:

Quote:

---

Yes sorry also-- thought it was an LX90--- BUT still check the cable and RELOAD the firmware.

---

Joe...I checked the cable. You are correct. The cable can be reversed from the HBx to the scope. Thanks.

Ok..I reversed the cable about 6:30pm yesterday. Did another RESET. The Sun was still high, so I couldn't do a CALIBRATE SENSORS. I just did an AUTOALIGN and pressed enter at both stars it chose. I then went to Jupiter. Amazing...without proper alignment the scope pointed to Jupiter...this was about 7 pm. I focussed on Jupiter and saw Ganymede on the surface of Jupiter....guys..this was whilst the sun was shining.
Well I kept it on Jupiter for 15min. and it held the readings. Pressed MODE to go back one step...
SOLAR SYSTEM: JUPITER then the jumbled garbage started again.

--------------------
Meade 10"LX200R w UHTC "Ocean Liner Anne" + wireless Autostar II
DSI Pro w CCD Color Filter Set
Celestron NexStar 102 SLT "SteamShip Anne"
Celestron SkyMaster 15X70 Binoculars "Can-U Anne"
*New* Canon EOS Rebel XSi/450D DSLR Camera Now Moded

Post Extras: