Return to the Cloudy Nights Telescope Reviews home page

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User

Astrophotography and Sketching >> Beginning Imaging

Pages: 1
Tim C
member


Reged: 11/11/07
Posts: 31
Loc: Marietta, GA
Connecting my W.O. 66mm to a DSLR?
      #2666671 - 09/27/08 06:10 PM

Hi,

I just found a good deal online for a Williams Optics 66m Zenithstar refractor and my birthday isn't too far away so I pulled the trigger. Was hoping someone could help me figure out how to connect this scope to my 450D for the best astrophotography performance. I'm 99% sure I'm going to order the .8X W.O. Reducer/Field Flattener for it. What kind of T adapter should I use? I'm a beginner but I've been using an 8"SCT thus far with a celestron SCT t-adapter. This adapter is about 3 inches long and has a diameter of 1.5 inches. Will this work with the WO 66 or should I buy a different t adapter (perhaps something shorter and/or with a wider diameter to reduce vignetting)? Thanks for any advice you have.

Tim

--------------------
Tim
My Astrophotos:
http://mediafire.com/tcardinastrophotos
Nexstar 8SE
Denkmeier Powerswitch Diagonal
LXD75 Mount
Williams Optics Zenithstar 66
Canon xsi/450D (unmodified)
Various eyepieces and other stuff

Edited by Tim C (09/27/08 06:11 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Mobius1
sage


Reged: 08/28/05
Posts: 472
Loc: Madison, WI / Gurnee, IL
Re: Connecting my W.O. 66mm to a DSLR? new [Re: Tim C]
      #2666771 - 09/27/08 07:34 PM

I know that the 66mm is a bit different from the larger scopes in the kind of visual back it has. But i believe that you can get an adapter with SCT threads on the rear, so that you could mate your T to SCT adapter on your '66.

--------------------
Martin

Orion 100ED
Orion 120-ST EQ
PST-Ha
Celestron CGE 1100
Canon Rebel XSI
DSI-IIC
Yerkes Observatory Volunteer
(24" Cass on weekends)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Peds
sage


Reged: 03/07/07
Posts: 268
Loc: Brasilia, Brazil
Re: Connecting my W.O. 66mm to a DSLR? new [Re: Mobius1]
      #2666835 - 09/27/08 08:14 PM

I use the WO 0.8x Reducer / Field Flattener together with a regular Canon T-ring. That's all you need to get nice round stars covering the entire sensor.

The reducer/ff comes with one side being a SCT thread that is made specifically for connecting directly to the 66mm scopes. The other side is for your T-ring which connects the camera to the reducer/ff.

P.

--------------------
Orion 80mm ED Apo
White William-Optics Zenithstar 66SD Apo


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tim C
member


Reged: 11/11/07
Posts: 31
Loc: Marietta, GA
Re: Connecting my W.O. 66mm to a DSLR? new [Re: Peds]
      #2666884 - 09/27/08 08:59 PM

ah, got it now. Thanks very much.

--------------------
Tim
My Astrophotos:
http://mediafire.com/tcardinastrophotos
Nexstar 8SE
Denkmeier Powerswitch Diagonal
LXD75 Mount
Williams Optics Zenithstar 66
Canon xsi/450D (unmodified)
Various eyepieces and other stuff


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
4 registered and 5 anonymous users are browsing this forum.

Moderator:  Charlie Hein, knuklhdastnmr 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 110

Jump to

Home



Cloudy Nights Sponsor: Astronomics