Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
Crazy Canadian
member
Reged: 01/30/08
Posts: 16
Loc: Saskatchewan
|
|
Hi everyone,
For my project I need a pyrex 1.00" m/a secondary, but my web surfing has turned up no one who produces this (I've found pyrex 1.3, plate glass 1.1 and quartz 1.00)...does anyone know of a company who sells/or customs this size of pyrex secondary?
thanks to all who reply
|
dave b
Carpal Tunnel
Reged: 05/10/05
Posts: 2460
|
|
the quartz would be a higher quality substrate than the pyrex, so i would just get the quartz
-------------------- dave bonandrini
30" f/5.2 Dobsonian
President of GCAC
Astromart Moderator
|
Crazy Canadian
member
Reged: 01/30/08
Posts: 16
Loc: Saskatchewan
|
|
Hi Dave,
Yes I agree the quartz is better, but the reasoning behind wanting Pyrex is that my project is more of a restoration project than an ATM one and the person I am doing it for wants the old scope the way he remembers it, with as close to "original" as can be, hence the pyrex. Its a sentimental thing.
|
dave b
Carpal Tunnel
Reged: 05/10/05
Posts: 2460
|
|
do you think he will see a difference looking at the quartz in daylight?
keep an eye on
http://surplusshed.com/
in the flats department.
-------------------- dave bonandrini
30" f/5.2 Dobsonian
President of GCAC
Astromart Moderator
|
mark cowan
Vendor (Obsidian Optics)
Reged: 06/03/05
Posts: 1370
Loc: salem, OR
|
|
http://www.edmundoptics.com/onlinecatalog/displayproduct.cfm?productid=1729
Edmunds sells a 1.062" 1/8 wave surface Pyrex secondary here, US made. It might even be the same item!
Best, Mark
|
Gregg Lobdell
sage
Reged: 01/20/06
Posts: 373
Loc: Covington, WA
|
|
Newport Glass shows a 1" pyrex diagonal, part # PQDX100 or PTDX100 (1/4 or 1/10 wave) see: http://newportglass.com/angwcat.htm section 13
-------------------- Clear skies,
Gregg
|
Crazy Canadian
member
Reged: 01/30/08
Posts: 16
Loc: Saskatchewan
|
|
Dave, Mark, & Greg
Thank you guys so much for the links!!! I think I found what I am looking for with edmund optics secondary!! Once again I appreciate the help!!
Tex
|
|
7 registered and 2 anonymous users are browsing this forum.
Moderator: Don W, Joe Cipriano
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 261
|
|
|
|
|
|
|