Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
dougspeterson
Pooh-Bah
Reged: 09/01/04
Posts: 1041
Loc: Murrieta, CA
|
|
The focuser holds the oculars with a friction fit and a little grease. Unfortunately the two 4mm 0.965" orthos I have on hand will not come to focus, however 6mm will. The star test at 70x appears excellent, and at F7 the color abberation of the achromat appears much better than typical contempory spotting scopes.
Unfortunately, the azimuth motion of the simple pivot mount (similar to the current SV, WO, etc., mounts that have become popular) has an unacceptable amount of stiffness. I am communicating with Scope City about a fix. The altitude axis is slippery smooth, and there are of course locks on both axes. Turns out the azimuth axis is bone dry, no grease, not just dried out, never was any. Anyone recommend a grease?
The scope came without caps, anyone know if that is normal for Zeiss?
-------------------- 18" Dob
12" SCT
8" TMB F6 + Chromacor
6" F6 APM/LZOS Fluorite triplet, 32", 32lbs
2ea. 6mm singlets, one blind
"--Granted, that's a worse case scenario. The destruction might in fact be ... limited to our own galaxy."
Edited by dougspeterson (01/25/09 05:12 AM)
|
|
12 registered and 8 anonymous users are browsing this forum.
Moderator: RLTYS, Glassthrower, Clive Gibbons
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 179
|
|
|
|
|
|
|