Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
JimWaterford
member


Reged: 01/20/09

Question on the Ioptron Minitower?
      #2988656 - 03/17/09 10:58 AM

The Ioptron Minitower I bought a few days ago is accurate and a blast for the whole family. I know the "To Park Postion" is for set up. Question #1 What is the "Park Scope" used for? Question #2 Do I change the "Tracking Speed" or leave it on "CEL"? When it is tracking I hear the motors running almost continuously. Thank you. Regards, Jim

Post Extras: Print Post   Remind Me!   Notify Moderator  
jasonj998
Banned - Duplicate Account


Reged: 08/19/08

Re: Question on the Ioptron Minitower? new [Re: JimWaterford]
      #2989802 - 03/17/09 11:49 PM

Park Scope command is to return the scope to park position (south & zenith). Whenever power is turned on, the initial position of the mount is park. If you did not park the scope, the scope may end up pointing ground while be slewed to the sky.

The tracking speed of CEL, SOL, and LUN are automatically switched itself depends on what object you are observing.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
33 registered and 44 anonymous users are browsing this forum.

Moderator:  Bowmoreman, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 327

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics