Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User
You are not logged in. [Login] Entrance · Main Index · Search · New user · Who's Online
FAQ · Calendar

Equipment Discussions >> Mounts
Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Pages: 1
amys
Carpal Tunnel
*****

Reged: 06/12/06

Loc: Groton, CT
Upgrading the Sphinx tripod new
      #3035620 - 04/10/09 08:08 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

I'm considering using some refund $$$ to buy a more heavy-duty tripod for my Sphinx. The only ones I'm aware of are those ash beauties made by Berlebach, which are mighty pricey, but many of which can be used with the Sphinx.

A few questions: am I likely to notice am improvement in stability if I switch to something like a Berlebach ash tripod?

Second: are there any other heavy-duty wood tripods out there I should consider?

And three, where does one get the proper hub/adapter to allow the Sphinx mount to attach to the tripod?

Post Extras: Print Post   Remind Me!   Notify Moderator  
starbob1
scholastic sledgehammer


Reged: 03/11/07

Loc: IN
Re: Upgrading the Sphinx tripod new [Re: amys]
      #3035624 - 04/10/09 08:12 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

The hal 130 tripod that Vixen makes is quite good.Do not under estimate it being aluminum.Getting a wood tripod IMHO would be only a cosmetic thing,

Post Extras: Print Post   Remind Me!   Notify Moderator  
amys
Carpal Tunnel
*****

Reged: 06/12/06

Loc: Groton, CT
Re: Upgrading the Sphinx tripod new [Re: starbob1]
      #3035633 - 04/10/09 08:18 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

My understanding of the HAL 130 is that it's longer than the 110 but not much sturdier, except for the fact that I wouldn't have to extend the legs as much. Thanks for your response.

Post Extras: Print Post   Remind Me!   Notify Moderator  
NHRob
Post Laureate
*****

Reged: 08/27/04

Loc: New Hampshire
Re: Upgrading the Sphinx tripod new [Re: amys]
      #3035654 - 04/10/09 08:32 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Try adding/building a wooden spreader which can be tightened up from underneath. This will firm up the tripod legs and add some damping to kill vibrations.

Rob

Post Extras: Print Post   Remind Me!   Notify Moderator  
Per Stymne
super member


Reged: 02/05/05

Loc: Söderbärke, Sweden
Re: Upgrading the Sphinx tripod new [Re: amys]
      #3036625 - 04/10/09 05:28 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Quote:


And three, where does one get the proper hub/adapter to allow the Sphinx mount to attach to the tripod?




You don't need a Sphinx adapter for a Berlebach tripod. The Berlebachs can be ordered with a top plate tailored for a Sphinx.

http://www.berlebach.de/?bereich=produkte&kategorie=10&sprache=english

Post Extras: Print Post   Remind Me!   Notify Moderator  
payner
scholastic sledgehammer
*****

Reged: 03/22/07

Loc: Bluegrass Region, Kentucky
Re: Upgrading the Sphinx tripod new [Re: amys]
      #3036704 - 04/10/09 06:20 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Another option is the Vixen pillar for the Sphinx SXD. These sell for $700 new and are available from most dealers, but about a one month wait for the boat from Japan to get it here.

Randy

Post Extras: Print Post   Remind Me!   Notify Moderator  
maknewtnut
Member
*****

Reged: 10/08/06

Re: Upgrading the Sphinx tripod new [Re: amys]
      #3037373 - 04/11/09 01:17 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

I'm working with Berlebach right now to bring about an adapter for Vixen SX mounts(and others later) to use on flat platform models such as UNI 4, 14, and 24. Something like their Losmandy adapter, but for SX. This allows mutliple uses for the tripod. Other than UNI 4 series with a Losmandy adapter, I get more requests for Berlebach tripods to support SX series mounts than any other.

I proposed the idea months ago, but I don't think they found it worth their while and/or it's importance(IMO)was lost in translation. Demand persists. If they don't offer more adapters, or perhaps even interchangeable platforms, I'll work up a line of my own.

Post Extras: Print Post   Remind Me!   Notify Moderator  
amys
Carpal Tunnel
*****

Reged: 06/12/06

Loc: Groton, CT
Re: Upgrading the Sphinx tripod new [Re: maknewtnut]
      #3037659 - 04/11/09 08:28 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Hi, Mark.

From your website, I was under the impression that some of the Berlebach tripods did have a top plate for the SX mount. No?

Post Extras: Print Post   Remind Me!   Notify Moderator  
maknewtnut
Member
*****

Reged: 10/08/06

Re: Upgrading the Sphinx tripod new [Re: amys]
      #3038386 - 04/11/09 04:39 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Yes, they do. For example, the UNI 8 series. What I'm referring to is being able to use interchangeable adapters on tripods with flat platoforms, such as the UNI 4 series.

The impetus is that customer feedback indicates folks stating they want to keep the tripod. This differs from most cases where tripods come and go as mounts change. Provisions to use either interchangeable adapters or even interchangeable plaforms makes this possible.

Post Extras: Print Post   Remind Me!   Notify Moderator  
RAKing
Postmaster
*****

Reged: 12/28/07

Loc: West of the D.C. Nebula
Re: Upgrading the Sphinx tripod new [Re: maknewtnut]
      #3038555 - 04/11/09 06:22 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

From the web specs, that UNI-8 looks like a great match for the SXW.

Ron

Post Extras: Print Post   Remind Me!   Notify Moderator  
Per Stymne
super member


Reged: 02/05/05

Loc: Söderbärke, Sweden
Re: Upgrading the Sphinx tripod new [Re: RAKing]
      #3040131 - 04/12/09 05:06 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Right, the Uni-8 is a perfect match for the Sphinx.

I use the Uni-8 + the Sphinx half pillar for my Sphinx SXW mount. Thanks to the half pillar, there is always sufficient clearance between the OTA (Intes Micro MN66) and the tripod legs even when observing objects in zenith.

And it feels as stable as a rock.

Post Extras: Print Post   Remind Me!   Notify Moderator  
amys
Carpal Tunnel
*****

Reged: 06/12/06

Loc: Groton, CT
Re: Upgrading the Sphinx tripod [Re: Per Stymne]
      #3040343 - 04/12/09 07:37 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Thanks for letting me know. I'm definitely thinking about it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1

Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Extra information
6 registered and 28 anonymous users are browsing this forum.

Moderator:  Bowmoreman, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 524

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics