Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
elbee
professor emeritus


Reged: 05/02/09

Loc: Arizona
how to add autoguiding to old televue GEM
      #3082951 - 05/03/09 03:04 PM

yes, in 1990 the televue gibralter mount offered a GEM head option. i have one of these with a RA axis motor drive (i'll post pics if you're skeptical :-) i want to try autoguiding for astrophotography. i dont mind spending a few hundred to get started (vs. drop down 1500 for a G-8, etc). i am trying to figure out what motor drive set i can attach to manual control shafts of the head that can be controlled by an autoguider. it appears the celestron DA motor drives for the CG-4 mount might work, but how do i control guiding from a computer instead of the hand control. can something like orion starshoot autoguider control the DA motor drives from celestron? the autoguiders i look at seem to have a single control wire whereas don't i need separate RA/DEC control signals if i have separate drive motors for each axis?

i can polar align the genesis such that i can take unguided prime focus photos with my DSLR for 30-60 sec. i have not been able to get the hang of manual off axis guiding, but looking to try to autoguide via the off axis guider

your input appreciated on a motor drive set and autoguider control that can work with this setup. thanks

lee


Post Extras: Print Post   Remind Me!   Notify Moderator  
iriise
member
*****

Reged: 09/09/08

Loc: Monterey County,Ca.
Re: how to add autoguiding to old televue GEM new [Re: elbee]
      #3084024 - 05/04/09 03:03 AM

Have a look at this page on the Shoestring Astronomy site.
http://www.store.shoestringastronomy.com/products_gp.htm
Scroll down to the handcontroller modification section.
Good luck,


Post Extras: Print Post   Remind Me!   Notify Moderator  
elbee
professor emeritus


Reged: 05/02/09

Loc: Arizona
Re: how to add autoguiding to old televue GEM new [Re: iriise]
      #3084525 - 05/04/09 11:46 AM

thank you. that page is very interesting and potentially useful but i still need to find a motor drive set i believe will work with my mount. the more i look at the celestron DA motor drives, the less i believe they will work...i'll keep checking.. thanks

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
8 registered and 19 anonymous users are browsing this forum.

Moderator:  Bowmoreman, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 370

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics