Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User
You are not logged in. [Login] Entrance · Main Index · Search · New user · Who's Online
FAQ · Calendar

Equipment Discussions >> Mounts
Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Pages: 1
qwerty
member


Reged: 01/08/05

Loc: Vermont
CGE updating motor controller
      #3095956 - 05/10/09 10:58 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

While updating the DEC motor controller on my CGE I got a communication error. Now the Dec motor will not respond. I get error code 17. Also when I tried to update again I get "can't find the telescope". Is there any recovery from this.The RA and hand controller updates went fine. In looking around all I could find is send back to Celestron.
Thanks for looking at this.
ron anstey

Post Extras: Print Post   Remind Me!   Notify Moderator  
Alph
Pooh-Bah


Reged: 11/23/06

Loc: Melmac
Re: CGE updating motor controller new [Re: qwerty]
      #3096095 - 05/10/09 12:21 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Quote:

I get error code 17.


You'll need to press the UNDO button multiple times to clear out that message before trying MCupdate again.

Post Extras: Print Post   Remind Me!   Notify Moderator  
qwerty
member


Reged: 01/08/05

Loc: Vermont
Re: CGE updating motor controller new [Re: Alph]
      #3096292 - 05/10/09 02:10 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Thank you it after doing this it said that the DEC moter was in the "boot mode". When I continued it told me it counldn't determne the current version and asked if I wanted to continue. Yes, it is now programing the DEC motor controller.
Thank you very much Alph. ron anstey

Post Extras: Print Post   Remind Me!   Notify Moderator  
qwerty
member


Reged: 01/08/05

Loc: Vermont
Re: CGE updating motor controller new [Re: qwerty]
      #3096363 - 05/10/09 02:52 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

It took two attempts. The first ended in another communication error. The second made it. Both motors now show version 5.14. Now if I could just get a clear night.
thanks, ron

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1

Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Extra information
23 registered and 27 anonymous users are browsing this forum.

Moderator:  Bowmoreman, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 285

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics