Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
StarWrangler
scholastic sledgehammer


Reged: 09/03/04

Loc: Three Rivers, MI U.S.A>
1 5/8" diameter shaft
      #3098932 - 05/11/09 06:45 PM

Hi All,

Can any one make a 1 5/8" diameter shaft about 6 to 8 inches long. Either made out of a standard pipe or a solid shaft with bore sight hole through it , and some type of tread on one end to fit a pipe flange.

It is for my old 6 inch Byers drive.

Thanks,

Alan


Post Extras: Print Post   Remind Me!   Notify Moderator  
polaraligned
professor emeritus


Reged: 12/26/08

Re: 1 5/8" diameter shaft new [Re: StarWrangler]
      #3099432 - 05/11/09 10:48 PM

If you give me a bit more details I can probably help you.
Can you use standard black pipe? Does the end need a tapered pipe thread?
A picture of what you want to do may be worth a thousand words. E-mail me at: polaraligned at verizon.net
Replace the "at" with @

Scott


Post Extras: Print Post   Remind Me!   Notify Moderator  
StarWrangler
scholastic sledgehammer


Reged: 09/03/04

Loc: Three Rivers, MI U.S.A>
Re: 1 5/8" diameter shaft new [Re: polaraligned]
      #3100942 - 05/12/09 06:22 PM

Thanks Scott,

I'll send you some more info tomorrow.


Alan


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
11 registered and 24 anonymous users are browsing this forum.

Moderator:  Bowmoreman, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 438

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics