Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User
You are not logged in. [Login] Entrance · Main Index · Search · New user · Who's Online
FAQ · Calendar

Equipment Discussions >> Mounts
Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Pages: 1
Fogboundturtle
professor emeritus


Reged: 05/20/09

Loc: Burnaby, BC
CG-5 assistance needed
      #3137456 - 05/31/09 11:44 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

I setup my CG5 for the first time last night, I polar align very roughly and I was trying to quick align so i can use the hand controller to move the mount with the hand controller.

I was able to move the mount left or right but it was impossbile to move it up and down. It just didn't respond to the up/down key. The clutch was lock on both RA and DEC.

What is wrong?

Post Extras: Print Post   Remind Me!   Notify Moderator  
rmollise
Postmaster
*****

Reged: 07/06/07

Re: CG-5 assistance needed new [Re: Fogboundturtle]
      #3137497 - 05/31/09 12:03 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Quote:

I setup my CG5 for the first time last night, I polar align very roughly and I was trying to quick align so i can use the hand controller to move the mount with the hand controller.

I was able to move the mount left or right but it was impossbile to move it up and down. It just didn't respond to the up/down key. The clutch was lock on both RA and DEC.

What is wrong?



By "up down" I assume you mean "declination"? If so, first make sure your declination cable is plugged in. Then try a higher slewing speed, 8 or 9 and see if that works.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Fogboundturtle
professor emeritus


Reged: 05/20/09

Loc: Burnaby, BC
Re: CG-5 assistance needed new [Re: rmollise]
      #3137650 - 05/31/09 01:42 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Thanks for you help. It seems that the DEC motor is not responding. I just bought it from a shop so it's going back. They had issue when I first got it. They said a connector was loose on the board. I bet this is the same thing for the Dec motor

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1

Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Extra information
34 registered and 27 anonymous users are browsing this forum.

Moderator:  Bowmoreman, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 366

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics