|
cosmoskid
professor emeritus
Reged: 11/15/08
Posts: 673
Loc: Indiana USA
|
|
Will resetting the hand controller restore it back to the original firmware version if it was updated to the newest firmware?
Thanks
--------------------
"Educate and inform the whole mass of the people... They are the only sure reliance for the preservation of our liberty." Thomas Jefferson.
"Who are they to judge the life I live? I know I'm not perfect and I don't live to be. But, before you start pointing fingers, make sure your hands are clean.”
|
Joe Lalumia
Post Laureate
Reged: 01/24/07
Posts: 3605
Loc: Rockwall, Texas, USA
|
|
NO--- it just changes ALL of the settings back to Factory Default-- so the SITE might be in California, and the TIME, DATE will be wrong if you you don't have the GPS model--
RESET-- then Calibrate Motors (with the same power supply you use outside), Train Drives, Calibrate Sensors in that order.
I always Calibrate Motors first thing every time--when I setup outside, I re-train the drives and Calibrate Sensors about once per year.
--------------------
LX90 8" LNT, SV Nighthawk & TelePOD, SV 80/9D & M4 mount, ETX 90, Orion XT10i, 20x80 binoculars, SV-BV3s-- www.texasastro.org
"Great minds discuss ideas;Average minds discuss events;Small minds discuss people." Unknown
|
cosmoskid
professor emeritus
Reged: 11/15/08
Posts: 673
Loc: Indiana USA
|
|
What is calibrate sensors? No setting in the controller for that unless it's under a different name. Also will the drives need to be retrained if the controller is reset?
Appreciate the help
--------------------
"Educate and inform the whole mass of the people... They are the only sure reliance for the preservation of our liberty." Thomas Jefferson.
"Who are they to judge the life I live? I know I'm not perfect and I don't live to be. But, before you start pointing fingers, make sure your hands are clean.”
|
Joe Lalumia
Post Laureate
Reged: 01/24/07
Posts: 3605
Loc: Rockwall, Texas, USA
|
|
It's under Telescope on the 497 controller with an LNT module--- like the Personal Edition model ETX---
other models will not have this if they don't do level and north automatically.
--------------------
LX90 8" LNT, SV Nighthawk & TelePOD, SV 80/9D & M4 mount, ETX 90, Orion XT10i, 20x80 binoculars, SV-BV3s-- www.texasastro.org
"Great minds discuss ideas;Average minds discuss events;Small minds discuss people." Unknown
|
|
1 registered and 4 anonymous users are browsing this forum.
Moderator: Shadowalker, oldsalt
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 449
|
|
|
|
|
|
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
