Just saw on the ASCOM Group @ Yahoo that the drivers for Meade Classic and Autostar have been updated. The updated drivers are listed as Meade driver 5.0.3. With this update one no longer has to install the old 5.0.0 driver then update to 5.0.1. Just install 5.0.3 (for first time installs) and run.
Post Extras:
dwitek
super member
Reged: 07/03/08
Posts: 170
Loc: White Lake, Michigan
That's good news because I think I've answered questions about 5.0.1 not running correctly on a first time install about a dozen times in the YO group.
Thanks for the update.
-------------------- 10" LX200 EMC Classic
Milburn wedge
Peterson Eye-Opener system
2" Dielectric Diagonal
JMI NGF Crayford focuser
Meade DSI Pro III
Meade DSI Pro I as autoguider
Piggybacked Stellarvue SV80ED
Post Extras:
Edward E
sage
Reged: 03/26/06
Posts: 404
Loc: Tucson, Arizona
Your welcome. Strange, the Yahoo group is good about answering posted question or at least asking one to search the site for the answer. Anyway, hope this resolves your problem. Clear skies.
Post Extras:
dwitek
super member
Reged: 07/03/08
Posts: 170
Loc: White Lake, Michigan
What I meant is that I have helped other members that have had this issue. I discovered and fixed this spring when I added my guide scope. But, thanks for the heads up.
-------------------- 10" LX200 EMC Classic
Milburn wedge
Peterson Eye-Opener system
2" Dielectric Diagonal
JMI NGF Crayford focuser
Meade DSI Pro III
Meade DSI Pro I as autoguider
Piggybacked Stellarvue SV80ED
Previous
Index
Next
Threaded
Edit
Reply
Quote
