Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User
Jason B
My wife says I am Obsessed...
   
Reged: 06/21/04
Loc: Mid-Michigan
|
"Motor Unit Fault"
#3173790 - 06/20/09 09:17 PM
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
I am in the process of adapting some LXD55 Motors to my Vixen GP mount. When I first got them all mounted, etc, it worked great. After I got everything together, scopes mounted, etc, the hand control now reads "Motor Unit Fault".
I checked and everything is balanced, mounted correctly, etc. All I basically did was mount the motors, check to make sure the gears worked, move the mount around a bit with the hand controller and then shut it off. I then mounted the scope, got ready to observe/test it out and turned it on. That's when I got that message.
Any help or suggestions are greatly appreciated.
Thanks!
|
John Carruthers
Skiprat
   
Reged: 02/02/07
Loc: Kent, UK
|
Re: "Motor Unit Fault"
[Re: Jason B]
#3174181 - 06/21/09 06:32 AM
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
First guess; loose conector. Second, something's too tight and the motor's stalling. 3rd, low power? crud on the encoder? (grasping at straws now)...
|
BCB
Undercover Saboteur
   
Reged: 11/24/03
Loc: Look over your shoulder
|
Re: "Motor Unit Fault"
[Re: John Carruthers]
#3174302 - 06/21/09 09:41 AM
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
Try doing a "calibrate motors" after initial power up. Something may have changed. Then retrain the drives.
Those items should be in the utilities section of the menus..
|
Jason B
My wife says I am Obsessed...
   
Reged: 06/21/04
Loc: Mid-Michigan
|
Re: "Motor Unit Fault"
[Re: BCB]
#3175060 - 06/21/09 06:44 PM
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
Thanks guys. No matter what button I hit, it goes to "Motor Unit Fault". I will try some of these suggestions though and report back.
Thanks! Keep em coming....
|
BRisley
Carpal Tunnel
   
Reged: 09/04/06
Loc: SW Florida
|
Re: "Motor Unit Fault"
[Re: Jason B]
#3175064 - 06/21/09 06:46 PM
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
Check with the Roboscoping Yahoo group. Brian
|
sxinias
member
Reged: 10/04/08
Loc: Greece
|
Re: "Motor Unit Fault"
[Re: BRisley]
#3175688 - 06/22/09 01:57 AM Attachment (37 downloads)
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
This croped up on the iOptron forum for the Nova GOTO. The problem there was power related .. too much line loss in power cord, too dirty or low voltage output from ac adapter, weak battery, etc.
Joe Meade 2045 on DS2000 Celestron C6S on Skywatcher AZ GOTO
|
ccs_hello
Postmaster
   
Reged: 07/03/04
|
Re: "Motor Unit Fault"
[Re: Jason B]
#3175884 - 06/22/09 08:00 AM
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
Jason,
Meade "MUF" is a catch-all error message. Since you did the GOTO adaptation, the error reasons can be many. Few things I would check first are: proper cabling, wiring incorrectly, encoder light shield, and proper power source.
Clear Skies!
ccs_hello
|
Jason B
My wife says I am Obsessed...
   
Reged: 06/21/04
Loc: Mid-Michigan
|
Re: "Motor Unit Fault"
[Re: ccs_hello]
#3175953 - 06/22/09 09:14 AM
|
Edit
|
Reply
|
Quote |
Quick Reply
|
|
|
Thanks guys!
|
|
7 registered and 27 anonymous users are browsing this forum.
Moderator: Bowmoreman, bilgebay, iceblaze
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 537
|
|
|
|
|
|
|