EVH
member
   
Reged: 08/01/09
Posts: 12
|
|
This is my first Jupiter taken last night. I'm used my ETX125 and an old QuickCam Communicate I had lying around. I modded it like I've seen others do- remove the lens and tape a 35mm film tube on it.
I'm just into my 2nd month with my scope. I was just amazed that the image onscreen is nothing like what I see at the eyepiece. Onscreen it was just a fuzzy white circle with just a hint of 2 grey bands. At the eyepiece, I get color; banding, I can see the GRS when it's there. All 4 moons are pinpoints. Watched one disappear last night.
I'm thinking my old QuickCam just does not have enough light sensitivity? I tried all of the combinations of settings I could to try and improve the onscreen image, but that was the best I could do.
Anyway, here's my first.
EVH
|
EVH
member
   
Reged: 08/01/09
Posts: 12
|
|
Forgot to say this was about 300 frames stacked with Registax then edited for bright, contrast and color.
EVH
|
drksky
super member
Reged: 09/01/09
Posts: 115
|
|
The quickcam uses a CMOS sensor which is not as sensitive as CCDs, like in the ToUCam and Neximage.
Here's one I took recently with my modified quickcam 4000. The QC lens was removed, and I used a piece of 1.25" drain pipe PVC epoxied to the camera housing as a nosepiece.
I've also recently gotten a Celestron Neximage which I'm going to post a shootout between the two.
My Blog
Edited by drksky (09/19/09 09:31 AM)
|
EVH
member
   
Reged: 08/01/09
Posts: 12
|
|
Thank you for your input. I've read that CMOS is noisier than CCD and I plan on getting a CCD webcam. I just had this one lying aound and thought I'd give it a whirl.
By the way, checked out your blog. Congrats on your giving up smoky treats. One of these days I'm gonna do the same.
EVH
|
drksky
super member
Reged: 09/01/09
Posts: 115
|
|
You should. You'll have to clean your optics less often.
-------------------- Tony C
AT8RC
C6-R
CG-5 ASGT
ST80 w/StarShoot Autoguider
Canon EOS 450D (Stock)
The Drinking Bird
|
EVH
member
   
Reged: 08/01/09
Posts: 12
|
|
Well, I haven't smoked around the scope. I know the kind of residue it leaves and that's reserved for my lungs. 
One o' the days.
|
RobertED
professor emeritus
   
Reged: 07/11/03
Posts: 1194
Loc: Johnston, RI
|
|
Great blog site, Drksky!!! I have a Celestron NexImage on order and am hoping to receive it before Oct 2. I'll be watching your blog site, eagerly awaiting the 'shootout' results of your imagers!! Clear Skies to all!!
|
Bob Moore
scholastic sledgehammer
   
Reged: 04/07/06
Posts: 823
Loc: New York
|
|
Here's one i did this weekend at Cherry Springs,32,000 frames form ccd web cam, on a 6" newt. mounted on a iOptron Mini Tower, stacked in Regi Stax
Bob
-------------------- A scope or two
|
EVH
member
   
Reged: 08/01/09
Posts: 12
|
|
Nice shot. I reeeeallllly gotta get a new cam. 
EVH
|