Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
wojo
sage
   
Reged: 09/28/07
Posts: 216
|
|
Hello ALL I am under taking a 20" project and need some help on how much of each size grit and fine grinding material to order for a pregenerated 20" mirror I had planned to get 4 kilos of Gugolz #74 pitch for lap making and extra for smaller size laps. This will be a hand grind. YOUR help is appreciated.................WOJO
|
JohnH
professor emeritus
Reged: 10/04/05
Posts: 734
Loc: vancouver near the wilds of B...
|
|
If you are pregenerated, you start with 220 or 320 grits.
My guess would be to take the grit quantities for a 10" and QUADRUPLE them. Four times the area.
This would mean 3 lbs 220 grit, 2 lbs 25 micron, 1lb each of 15 , 9 and 5 micron and 2 lbs of CeO. And 6 lbs pitch for your lap, assuming one lap, full size.
|
wojo
sage
   
Reged: 09/28/07
Posts: 216
|
|
JOHNH Thanks for the reply. a little too late, as I ordered just about what you suggested plus 4 kilos of #73 gugolz. so I should be good for awhile. TOM at GotGrit was very helpfull and had a good idea of what I should need, plus I have some of every thing left over from a previous mirror. THANKS ...........................WOJO
|
|
3 registered and 4 anonymous users are browsing this forum.
Moderator: Don W, Mike I. Jones
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 124
|
|
|
|
|
|
|