Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
zdravko
member
Reged: 03/02/05
Posts: 59
Loc: Maribor,Slovenija
|
|
I had the 10X50 marine nitrogen pured and watter proof bino on a sailing boat for a week. I hoped for a few quick scans of the milky way. Boy was I wrong.The bino misscolimated on the first day after a few bumps.I had it secure in a drawer. Is it possible to colimate this bino?.It has a rubber body ant there are no visible colimation adjustments. Does anybody have any colimation experience with this bino. I would aprisiate any info. Thanks
-------------------- Astreya 102/F6,5 APO
120/F5 BINOSCOPE
http://zdravko.spricer.com/
|
EdZ
Professor EdZ
   
Reged: 02/15/02
Posts: 14731
Loc: Cumberland, R I , USA42N71.4W
|
|
AP binos collimation screws revealed
this link from our "Best Of Collimation" threads shows the location of this model binocular. The screws are deep under a spot of glue that holds in a plug.
edz
-------------------- Teach a kid something today. The feeling you'll get is one of life's greatest rewards.
member#21
|
zdravko
member
Reged: 03/02/05
Posts: 59
Loc: Maribor,Slovenija
|
|
Thanks Ed. I have already anticipated that there will be a lot of glue under the ruber.So the screws are only on the right side of the prism assembly?Im asking this so I dont pool of the ruber from both sides of the binocular to make the least damage possible.
Thanks again Zdravko
-------------------- Astreya 102/F6,5 APO
120/F5 BINOSCOPE
http://zdravko.spricer.com/
|
EdZ
Professor EdZ
   
Reged: 02/15/02
Posts: 14731
Loc: Cumberland, R I , USA42N71.4W
|
|
there are screws on both barrels
you should not need to completely remove the rubber, only peel it back some.
edz
-------------------- Teach a kid something today. The feeling you'll get is one of life's greatest rewards.
member#21
|
|
8 registered and 20 anonymous users are browsing this forum.
Moderator: EdZ
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 114
|
|
|
|
|
|
|